Hauthane HD-3810
- Chemical Family
- Aliphatics, Polyurethanes (PU)AliphaticsPolyurethanes (PU)
Hauthane HD-3810 is an aliphatic, polyurethane topcoat which produces a soft, rubbery feel at low gloss levels. Features: Soft, rubbery/grabby feel. Inherently low gloss without the use of external flatteners. Silicone-free. Can be crosslinked to enhance performance. Forms a film at room temperature. Low VOC: 50 g/l less water.
Product families
Applications
- Film & Foil Coatings
- Overprint Varnishes
Product Families
- Top Coats
Other characteristics
- Brand
- Hauthane
- Features
- Crosslinkable, Low Gloss, Low VOC, Soft
- Product Type
- Top Coat
- Application Method
- Gravure Coating, Rod Coating, Spray
- Compatible Substrates & Surfaces
- Paper, Plastics
- Curing
HD-3810 can be air-dried. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.. HD-3810 may be crosslinked with carbodiimides, water-dispersible isocyanates or polyaziridines to further enhance performance properties.
- Markets
- Printing & Packaging
- Cure
- Air Dry
- Product Uses
HD-3810 is designed to impart a soft, rich textured coating on surfaces such as paper board, plastic films, molded rigid plastic parts and other smooth surfaces.
- Technology
- Ready-to-Use Products
- Labeling Claims
- Low VOC
- Silicone-free
- Application Methods
- Gravure Coating
- Rod Coating
- Spray
- Applications
HD-3810 may be used alone or in combination with other polyurethane dispersion resins or additives.; It may be applied by rotogravure, wire wound rod and spray.
- Ready to Use Product Features
- Crosslinkable
- Low Gloss
- Low VOC
- Soft
- Compatible Substrates and Surfaces
- Paper
- Plastics
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Solids | 34 - 36 | % |
| Viscosity | 50 - 200 | cps |
| pH | 7.0 - 9.5 | — |
| Density | 8.4 | lbs/gal |
| Softening Point | 300 | °F |
| VOC Content (as supplied) | 62 | gm/l |
| VOC Content (as supplied) | 47 | gm/l |
Table 2 of 2
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation | 550 | % | Tested at 20 inches/minute |
| Tensile Strength | 1600 | psi | Tested at 20 inches/minute |
| 100% Modulus | 385 | psi | Tested at 20 inches/minute |
| 200% Modulus | 480 | psi | Tested at 20 inches/minute |
| 300% Modulus | 600 | psi | Tested at 20 inches/minute |
