Hauthane HD-2602 DMM (L-2857)
- CASE Ingredients Features
- Abrasion ResistanceSlip Resistance
- Chemical Family
- Polyurethanes (PU)
Hauthane HD-2602 DMM (L-2857) is an NMP-free, APEO-free, silicone-modified, polyester-based, water-borne polyurethane dispersion. Features: May be formulated into low surface tension coatings. Excellent abrasion resistance. Non-fugitive silicone component. Crosslinkable for improved adhesion and performance. Contains dipropylene glycol dimethyl ether co-solvent.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Textile Manufacturing
- Overprint Varnishes
- Overprint Varnishes
- Gravure Printing
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- Hauthane
- End Uses
- Top Coat, Waterborne Coating
- Features
- Abrasion Resistance, Slip Resistance
- Compatible Substrates & Surfaces
- Metal, Plastics, Textiles
- Drying
HD-2602 DMM can be air dried, if desired, depending on film thickness.. Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.
- Carrier
- Water
- Markets
- Industrial
- Paints & Coatings
- Printing & Packaging
- Coating Type
- Top Coat
- Waterborne Coating
- Product Uses
HD-2602 DMM was designed primarily for topcoat applications where slip and abrasion resistance properties are required.. HD-2602 DMM contains a non-fugitive silicone component that provides low surface tension characteristics on flexible and rigid substrates including plastics, metals and textiles.
- Technology
- CASE Ingredients
- Labeling Claims
- APEO-Free
- NMP-free
- Application Methods
- Gravure Coating
- Spray
- Applications
HD-2602 DMM may be used as a sole vehicle or blended with acrylic emulsions for spray or rotogravure applications.. Rheology modifications can be made with associative thickeners for alternative application methods.
- Compatible Polymers and Resins
- Acrylics
- Compatible Substrates and Surfaces
- Metal
- Plastics
- Textiles
Technical data
Table 1 of 2
8 rows| Characteristic | Value | Unit |
|---|---|---|
| Solids | 34 - 36 | % |
| Viscosity | 50 - 500 | cps |
| pH | 7.0 - 9.5 | — |
| Density | 8.7 | lbs/gal |
| Softening Point | 365 | °F |
| VOC Content | 73 | gm/l |
| VOC Content (less water) | 1 9 0 | gm/l |
| Sward Hardness | 35 | — |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation | 300 | % | Tested at 20 inches/minute |
| Tensile Strength | 6375 | psi | Tested at 20 inches/minute |
| 100% Modulus | 3180 | psi | Tested at 20 inches/minute |
| 200% Modulus | 4610 | psi | Tested at 20 inches/minute |
