Hauthane HD-3011
- CASE Ingredients Features
- Blocking ResistanceGood Heat StabilityGood Hydrolysis ResistanceGood ToughnessHigh Melting PointImproves AdhesionRoom Temperature Curing
- Chemical Family
- Polyurethanes (PU)
Hauthane HD-3011 is a low cost, aromatic, polyether-based, aqueous polyurethane dispersion. Features: Medium soft, tough, flexible film. Unusually dry surface for non-blocking applications. High melting for thermal stability. Can be crosslinked with melamines or aziridines for true thermoset. character and increased adhesion. Excellent hydrolytic stability. Contains n-methyl pyrrolidone (NMP) co-solvent.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Wallcoverings & Decorative Laminates
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- Hauthane
- End Uses
- Waterborne Coating
- Features
Blocking Resistance, Good Heat Stability, Good Hydrolysis Resistance, Good Toughness, High Melting Point, Improves Adhesion, Room Temperature Curing
- Curing
HD-3011 can be air dried at ambient room temperatures.. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.
- Carrier
- Water
- Markets
- Building & Construction
- Cure
- Air Dry
- Coating Type
- Waterborne Coating
- Product Uses
HD-3011 is a highly versatile coatings and adhesive polymer for applications where lightfastness is not critical.; Its dry surface and high melting point properties prevent blocking problems.; Excellent for use as a solvent (MEK) reactivate-able adhesive for bonding and laminating applications.; Compatible with acrylic and other aqueous polymers for optimum cost/performance balance.
- Technology
- CASE Ingredients
- Application Methods
- Dip Coating
- Gravure Coating
- Spray
- Applications
HD-3011 can be used as a sole vehicle or blended with acrylic emulsions for spray, dip, or rotogravure applications.. It can be thickened with associative thickeners for alternative application methods.
- Compatible Polymers and Resins
- Acrylics
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Solids | 34 - 36 | % |
| Viscosity | 50 - 200 | cps |
| pH | 7.0 - 9.5 | — |
| Density | 8.4 | lbs/gal |
| Softening Point | 300 | °F |
| VOC Content (as supplied) | 62 | gm/l |
| Sward Hardness | 12 | — |
Table 2 of 2
5 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation | 450 | % | Tested at 20 inches/minute |
| Tensile Strength | 4000 | psi | Tested at 20 inches/minute |
| 100% Modulus | 1100 | psi | Tested at 20 inches/minute |
| 200% Modulus | 1600 | psi | Tested at 20 inches/minute |
| 300% Modulus | 2000 | psi | Tested at 20 inches/minute |
