Hauthane HD-2139
- CASE Ingredients Features
- High GlossMar ResistanceReduced WearStain Resistance
- Chemical Family
- Polyurethanes (PU)
Hauthane HD-2139 is an aliphatic, polyester-based, aqueous urethane dispersion specifically developed for factory coated PVC flooring. Features: High gloss. Excellent mar and wear resistance. Excellent resistance to staining. Remarkably high balance of physical properties. Contains n-methyl pyrrolidone (NMP) co-solvent.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Concrete Coatings & Stains
- Overprint Varnishes
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- Hauthane
- Features
High Gloss, Mar Resistance, Reduced Wear, Stain Resistance
- Compatible Substrates & Surfaces
- Concrete
- Curing
HD-2139 should be dried by forced hot air or heat lamp before entering oven. Typical drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties. Maximum performance is attained with additions by weight of 5% HA-801 melamine crosslinker or 4% HA-800 aziridine crosslinker.
- Carrier
- N-Methyl Pyrrolidone
- Markets
- Paints & Coatings
- Cure
- Air Dry
- Technology
- CASE Ingredients
- Suggested Uses
HD-2139 was developed as a high gloss, no wax topcoat for expanded PVC flooring. Can be factory applied as a fused coating during PVC expansion. HD-2139 is ideally suited for PVC roll or sheet goods requiring a 180 degree reverse bend
- Application Methods
- Reverse Roll Coating
- Application
HD-2139 can be used as a sole vehicle or blended with acrylic emulsions and applied by rotogravure, reverse roll, flexible blade, or wire wound rod. It may be thickened for alternative application methods.
- Characteristics
- High gloss
- Excellent mar and wear resistance
- Excellent resistance to staining
- Remarkably high balance of physical properties
- Contains n-methyl pyrrolidone (NMP) co-solvent
- Compatible Polymers and Resins
- Acrylics
- Polyvinyl Chloride (PVC)
- Compatible Substrates and Surfaces
- Concrete
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Solid Content | 32 - 34 | % |
| Viscocity | 50 - 150 | cPs |
| pH | 7.0 - 9.5 | — |
| Density | 8.7 | lbs/gal |
| Softening Point | 360.0 | °F |
| Volatile Organic Compounds | 122.0 | gm/l |
| Sward Hardness | 50.0 | — |
Table 2 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Elongation (at 2 inch/min) | 135.0 | % |
| Tensile Strength (at 2 inch/min) | min. 6000 | psi |
| 100% Modulus (at 2 inch/min) | 5700.0 | psi |
