Hauthane HD-2107 DMM (L-2877)
- CASE Ingredients Features
- Abrasion ResistanceExcellent Scratch ResistanceGood Balance of PropertiesGood ToughnessWeather Resistance
- Chemical Family
- Polyurethanes (PU)
Hauthane HD-2107 DMM (L-2877) is a hard, NMP-free, APEO-free, aliphatic, polyester-based, aqueous polyurethane dispersion with an exceptional balance of properties. Features: Forms tough, abrasion- and mar-resistance films. Outstanding water and chemical resistance. Excellent exterior weathering performance. Can be crosslinked to enhance performance. Dilution and clean-up with ordinary tap water. Contains dipropylene glycol dimethyl ether (DMM) co-solvent.
Properties
- Physical Form
- Dispersion
Identification
- CASE Ingredients Functions
- Binder & Resin
Product families
Applications
- Vehicle Refinish
- Concrete Coatings & Stains
- Architectural Coatings
- Vehicle Refinish
- Wood Flooring
- Leather Manufacturing
- Textile Manufacturing
- Film & Foil Coatings
- Film & Foil Coatings
- Gravure Printing
Product Families
- Polyurethanes (PU)
Other characteristics
- Brand
- Hauthane
- End Uses
- Top Coat, Waterborne Coating
- Features
Abrasion Resistance, Excellent Scratch Resistance, Good Balance of Properties, Good Toughness, Weather Resistance
- Compatible Substrates & Surfaces
Concrete, Leather, Metal, Plastics, Textiles, Wood
- Drying
HD-2125 DMM may be dried at ambient temperatures with supplemental co-solvent addition of 5% DPM or DPnB on total formulation weight.. Typical oven drying temperatures and dwell times for aqueous coatings are sufficient to produce optimal film properties.
- Carrier
- Water
- Markets
- Automotive & Transportation
- Building & Construction
- Industrial
- Paints & Coatings
- Printing & Packaging
- Coating Type
- Top Coat
- Waterborne Coating
- Product Uses
HD-2107 DMM was designed for topcoat applications on a wide variety of substrates, including concrete, metal, plastic and wood.
- Technology
- CASE Ingredients
- Labeling Claims
- APEO-Free
- NMP-free
- Application Methods
- Gravure Coating
- Spray
- Applications
HD-2125 DMM may be used as a sole vehicle or blended with acrylic emulsions for spray or brush applications. Rheology modifications can be made with associative thickeners for alternative application methods.
- Compatible Polymers and Resins
- Acrylics
- Compatible Substrates and Surfaces
- Concrete
- Leather
- Metal
- Plastics
- Textiles
- Wood
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Solids | 34 - 36 | % |
| Viscosity | 50 - 500 | cps |
| pH | 7.0 - 9.5 | — |
| Density | 1.04 | kg/l |
| Softening Point | 177 | ºC |
| VOC Content | 65 | gm/l |
Table 2 of 2
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Elongation | 235 | % | Tested at 20 inches/minute |
| Tensile Strength | 33 MPa | MPa | Tested at 20 inches/minute |
| 100% Modulus | 46 | MPa | Tested at 20 inches/minute |
| 200% Modulus | 900 | psi | Tested at 20 inches/minute |
