Nitoseal® MS600
Nitoseal® MS600 is a one part medium modulus sealant based on hybrid silyl modified polyether technology. It has a fast rate of cure and forms a tough, highly durable and water resistant elastomer.
Properties
- Physical Form
- Paste
Other characteristics
- Brand
- Nitoseal
- Product Type
- 1K (1 component) Sealant
- Application Area
- Bridges, Tanks
- Color
Gray, for special colors contact Fosroc for further Information
- Markets
- Building & Construction
- Industrial
- Storage
Shelf life of 12 months if kept in a dry store at 10 - 20°C in original unopened packaging. If stored at high temperatures and / or high humididy, the shelf life may be significantly reduced.
- Advantages
Recommended for use in contact with potable water.; Meets key international standards.; Resistant to aerobic and anaerobic bacteriological attack.; Exhibits excellent water resistance.; Excellent resistance to dilute acids and alkalis.; Cures to a tough, elastic rubber seal.; Accommodates continuous and pronounced cyclic movement.; High resistance to aging, reduces physical damage due to climatic extremes.; Single component yet fast rate of cure.; Easy to apply at low temperature.; Can be applied to damp substrates.; Isocyanate free technology.
- Limitations
Should not be applied at temperatures below 5°C.; Not suitable for contact with bituminous materials.; Not suitable for contact with solvents, oil or petrol.; Whilst Nitoseal MS600 has excellent adhesion to many types of residual sealant, its use should not be considered a substitute for a good standard of joint preparation.; Nitoseal MS600 must be allowed to cure for 7 days before sea water or sewage immersion. Tidal sea and river wall joints can be sealed provided this condition is met.
- Technology
- Ready-to-Use Products
- Packaging Type
- Sachets
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Application Temperature | 5 - 50 | °C | — |
| E-Modulus | max. 0.6 | N/mm2 | ISO 8339 |
| Elongation | min. 600 | % | ASTM D412 |
| Hardness (20°C) | 32.0 | Shore A | — |
| Movement Accommodation Factor (Butt Joints) | 25.0 | % | — |
| Movement Accommodation Factor (Lap Joints) | 50.0 | % | — |
| Service Temperature (Dry) | -30 - 80 | °C | — |
| Service Temperature (Wet) | max. 40 | °C | — |
| Skinning Time (Depending on Ambient Conditions) | max. 2 | hours | — |
| UV Resistance | Excellent | — | — |
