Nitoseal® MS100
- Chemical Family
- Silyl-modified Polymers (SMP)
Nitoseal® MS100 is a tough, durable elastomeric joint sealant. It is based upon hybrid silyl modified polyether technology. It is suitable for use over a wide range of external and internal building applications and has excellent weather resistance. Nitoseal® MS100 has excellent primer-less adhesion to a wide range of common building substrates and does not stain concrete, marble and other masonry surfaces.
Other characteristics
- Brand
- Nitoseal
- Product Type
- 1K (1 component) Sealant
- Application Area
- Acoustic Barrier
- Compatible Substrates & Surfaces
- Concrete, Marble, Masonry
- Usage
Nitoseal MS100 has been formulated for stain-free sealing of joints in and around concrete, brick, masonry, pre-cast panels, stone cladding, windows, doors and fiber cement sheeting.
- Color
White, Gray and Black (other colors available see local Fosroc office)
- Markets
- Building & Construction
- Storage
Cartridges: Shelf life of 12 months if kept in a dry store at 10 – 20°C in original unopened packaging. If stored at high temperatures and / or high humididy, the shelf life may be significantly reduced.
- Advantages
Will not stain masonry, marble or other surfaces.; Excellent primer-less adhesion to most common building materials.; Can be applied to damp substrates; Fast neutral cure.; Highly flexible with excellent application characteristics.; Low odor, environmentally friendly.; Low modulus and high movement capabilities.; Excellent UV and weather resistance; Performs as an acoustic sealant; Good adhesion to silicone, polysulphide or polyurethane contaminant.
- Technology
- Ready-to-Use Products
Technical data
Table 1 of 1
19 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Application Range (Uncured Sealant) | 5 - 50 | °C | — |
| BAAQMD Reg 8 Rule 51 | Passes | — | — |
| Cure Rate (Uncured Sealant, 24 hrs, 20°C, 50% RH) | 3.0 | mm | — |
| Cure Rate (Uncured Sealant, 7 days, 20°C, 50% RH) | 8.0 | mm | — |
| E-Modulus (Cured Sealant) | max. 0.4 | N/mm2 | ISO 8339 |
| Elongation (Cured Sealant) | min. 900 | % | ASTM D412 |
| Flash Point (Uncured Sealant) | min. 65 | °C | — |
| LEED EQc4.1 | Passes | — | — |
| Modulus Classification | Low | — | — |
| Movement Accommodation Factor (Butt Joints, Primed) | 50.0 | % | — |
| Movement Accommodation Factor (Butt Joints, Unprimed) | 25.0 | % | — |
| Movement Accommodation Factor (Lap Joints, Primed) | 100.0 | % | — |
