Nitoseal® MS60
- Chemical Family
- Silyl-modified Polymers (SMP)
Nitoseal® MS60 is a one part, low modulus sealant based on hybrid silyl modified polyether ("MS") technology.
Properties
- Physical Form
- Paste
Product families
- Caulks & Sealants
Other characteristics
- Brand
- Nitoseal
- Product Type
- 1K (1 component) Sealant
- Application Area
- Acoustic Barrier, Universal Joints
- Acoustic Barrier
- Universal Joints
- Usage
Nitoseal MS60 is suitable for sealing joints in concrete, brickwork, blockwork, perimeter sealing around doors and windows, and non-trafficked floor joints.
- Color
White, Gray and Black (other colors available see local Fosroc office)
- Markets
- Building & Construction
- Industrial
- Storage
Shelf life of 12 months if kept in a dry store at 10 - 20°C in original unopened packaging. If stored at high temperatures and / or high humidity, the shelf life may be significantly reduced.
- PACKAGING
- Nitoseal MS60
- Advantages
- Adhesion to most common building materials.
- Single component with fast rate of cure.
- Available in a range of colors.
- Easy to apply.
- Can be applied to damp substrates.
- Primerless for most applications.
- UV resistant and color stable.
- Performs as an acoustic sealant.
- Estimating
- Guide to Quantities
- Limitations
Should not be applied at temperatures below 5°C.; Not suitable for water immersed conditions. Nitoseal MS600 should be used for this application.; Not suitable for contact with bituminous materials.; Not suitable for trafficked floor joints. Nitoseal MS300 should be used for this application.; May cause staining to decorative stone. For a non-staining sealant use Nitoseal MS100.; Not suitable for contact with solvents, oil or petrol.; Should only be over-coated with a compatible, flexible coating capable of accommodating the expected movement in the joint. Over-coating may reduce the movement capability of the sealant.; Confirm compatibility with coating if applied to painted surfaces.
- Joint Design
Nitoseal MS60 may be applied to joints between 5 and 35mm wide. To minimize stress imposed on the joint sealant, all moving joints should be designed to an optimum width to depth ratio of 2:1 with an overriding minimum depth of 5mm for non-porous surfaces and 10mm for porous surfaces. Joint width should be sufficient to ensure the MAF of the sealant is not exceeded. For joint widths exceeding 35mm, please contact your local Fosroc Technical Service Department.
- Technology
- Ready-to-Use Products
- Packaging Type
- Sachets
- Labeling Claims
- Environmentally Friendly
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Application Temperature | 5 - 50 | °C | — |
| BAAQMD Reg 8 Rule 51 | Passes | — | — |
| Colour Stability | Very Good | — | — |
| Cure Rate (20°C, 50% RH, 24 hours) | 2.0 | mm | — |
| E-Modulus | max. 0.4 | N/mm2 | ISO 8339 |
| Hardness (23°C) | min. 20 | Shore A | — |
| LEED EQc4.1 | Passes | — | — |
| Movement Accommodation Factor | 0.25 | % | — |
| SCAQMD Rule 1168 | Passes | — | — |
| Service Temperature | -20 - 70 | °C | — |
| Skinning Time (Depending on Ambient Conditions) | max. 2 | hours | — |
| UV Resistance | Very Good | — | — |
