Colpor 200
Colpor 200 is a cold applied, two part polyurethane sealant which is designed for joints in concrete paved areas. The capability of accommodating cyclic movements is retained by Colpor 200 throughout extremes of temperature conditions. Colpor 200 is resistant to fuel, oil and hydraulic fluid spillage, will not harden in cold weather nor become excessively soft or pick up in hot conditions. Colpor 200 has high durability and long service life which significantly reduces maintenance costs.
Other characteristics
- Brand
- Colpor
- Cure Method
- Chemical Cure
- Product Type
- 2K (2 component) Sealant
- Application Area
- Marine Applications
- Compatible Substrates & Surfaces
- Concrete, Masonry
- Markets
- Automotive & Transportation
- Building & Construction
- Storage
12 months in original containers stored in cool, dry conditions, i.e. not exceeding 25°C. Storage above this temperature may reduce shelf life.
- Advantages
- Cold applied - no heating equipment required.
- Fuel, oil and hydraulic fluid resistant.
- Self-leveling
- Tough rubbery seal.
- High performance - less maintenance.
- Cure
- Chemical Cure
- Limitations
Primer No. 20 is not compatible with bituminous surfaces. For situations where Colpor 200 could come into contact with pavement asphalt (for example, in a transition joint between concrete and asphalt pavements), contact the local Fosroc office for advice.
- Technology
- Ready-to-Use Products
- Specification
Where so designated on the drawing, joints are to be sealed using Fosroc Colpor 200, pavement sealant manufactured by Fosroc to BS 5212: 1990 and U.S.Federal Specification SS-S 200E:1984. Joints shall be prepared and the sealant mixed and applied in accordance with the manufacturer's current data sheet.
Technical data
Table 1 of 2
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Application Temperature | min. 5 | °C | — |
| Flash Point (Nitroflor Sol) | 33.0 | °C | — |
| Flash Point (Primer No. 20) | 30.0 | °C | — |
| Full Cure (25°C) | 5 - 7 | days | — |
| Hardness (25°C) | 8 - 12 | Shore A | — |
| Mixed Density | 1.32 to 1.38 g/cc | — | — |
| Movement Accommodation Factor (Butt Joints) | 25.0 | % | BS 6093 |
| Setting Time (35°C) | 12 - 16 | hours | — |
| Solids Content | 94 - 98 | % | — |
Table 2 of 2
11 rows| Characteristic | Value |
|---|---|
| Aviation Fuels (Occasional Spillage) | Resistant |
| Diesel Fuels (Occasional Spillage) | Resistant |
| Dilute Acids (Occasional Spillage) | Resistant |
| Hydraulic Fluids (Occasional Spillage) | Resistant |
| Kerosene (Occasional Spillage) | Resistant |
| Mid Alkalis (Occasional Spillage) | Resistant |
| Mineral Oils (Occasional Spillage) | Resistant |
| Petrol (Occasional Spillage) | Resistant |
| Skydrol (Occasional Spillage) | Resistant |
| Synthetic Oils (Occasional Spillage) | Resistant |
| White Spirit (Occasional Spillage) | Resistant |
