Nitoseal® PE290
- Chemical Family
- Polyesters
Nitoseal® PE290 three-component flexibilised polyester based sealant cures to form a tough resilient seal with a limited degree of movement. The material is self leveling and can be poured or gunned directly into horizontal slots. Nitoseal® PE290 will adhere to both concrete and asphalt surfaces that have been well prepared whether dry or damp.
Other characteristics
- Brand
- Nitoseal
- Product Type
- 3K Sealant
- Compatible Substrates & Surfaces
- Asphalt, Concrete, Masonry, Metal, Steel
- Markets
- Building & Construction
- Storage
Shelf Life - 6 months if stored in the original unopened containers in a cool dry place at ambient temperatures below 25°C. Do not store in direct sunlight.
- Advantages
Excellent adhesion to concrete, asphalt and steel.; No primer required in dry or damp conditions.; Good resistance to chemicals, de-icing salts and hydrocarbons.; Slightly flexible to accommodate limited movement.; Fast cure at 20°C and above minimizes traffic disruption.; Can be applied at low temperatures, cures below freezing.; Available in black for use on asphalt and gray for use on concrete.
- Limitations
Applications should not commence if the temperature of the substrate is below 5°C.; Service temperature range of Nitoseal PE290 is from -30°C up to + 80°C.
- Technology
- Ready-to-Use Products
- Pot Life (20°C)
- 45.0
- Pot Life (35°C)
- 20.0
Technical data
Table 1 of 3
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compressive Strength (20°C, 7 days) | 17.0 | N/mm² | BS 6319 Part 2 |
| Dielectric Strength (20°C) | 12.5 | kV/mm | ASTM D149 |
| Flash Point (Nitoseal PE290) | 28.0 | °C | — |
| Flash Point (Solvent 102) | 33.0 | °C | — |
| Flexural Strength (7 days, 20°C) | 5.0 | — | BS 6319 Part 3 |
| Hardness (7 days, 20°C) | 90.0 | Shore A | — |
| Initial Cure (20°C) | 60.0 | minutes | — |
| Initial Cure (35°C) | 30.0 | minutes | — |
| Linear Shrinkage (20°C) | 0.005 | — | ASTM C531.74 |
| QUV Weatherometer (1000 hours, 20°C) | Slight Discolouration | — | ASTM G53.77 |
| Specific Gravity (20°C) | 1.8 | — | — |
| Water Absorption (20°C) | 0.0015 | — | ASTM C413 |
Table 2 of 3
1 row| Characteristic | Value | Unit |
|---|---|---|
| DC Insulation Resistance (2500 Volts, 20°C) | min. 2.5 x 10⁹ | Ohms |
Table 3 of 3
3 rows| Characteristic | Value |
|---|---|
| Aviation Fuel | Excellent |
| Salt Water | Excellent |
| Saturated Urea Petrol | Excellent |
