Gel Coat™
Sea Hawk Gel Coat™ is a premium quality isophthalic NPG gel coat formulated to meet rigid requirements in the boating, transportation, and sanitary applications. Meets American National Standard for plastic bath tubs, show receptors, and shower stalls. (ANSI Z124.1, .2005, Sec. 6.1). May be used to patch gel coating, or for new application. Common uses include boats, RV’s, showers, tubs, pools, and more.
Other characteristics
- Brand
- Sea Hawk Paints Gel Coat
- Color
Black, Blue, Green, Grey, Orange, Red, Transparent, White, Yellow; Black; Blue; Green; Grey; Orange; Red; Transparent; White; Yellow
- End Uses
- FRP Boats, Marine Applications, Pools, Tubs
- Features
Chemical Resistant, Excellent Gloss Retention, Good Sagging Resistance, Good Weather Stability, High Gloss
- Functions
- Surface Finish
- Processing Methods
- Spray Lay-up
- Markets
- Automotive & Transportation
- Building & Construction
- Storage
Avoid prolonged exposure at temperatures above 85°F and to direct sunlight. Store in a cool, dry place. This material will remain stable for three months when stored at 73°F or below. Warmer temperatures will reduce the usage life of this product. Keep away from heat, sparks, and flame. Keep container tightly closed. Prevent contamination with foreign material. Store below 100°F, out of sunlight. Avoid contact and wear protective clothing including goggles and gloves. Use with adequate ventilation.
- Shelf LIfe
- 270 Days when stored under cool, dry conditions.
- Application
Best when applied by spray. Gel Coat delivery rate of no more than 2.5 pounds per minute with conventional air atomized spray, and no more than 4 pounds per minute with airless equipment. For more detailed gel coat application please go to www.seahawkpaints.com/Gel Coat.
- Limitations
Apply in good weather when air and surface temperatures are above 60°F (16°C). Surface temperature must be a least 6°F (1°C) above dew point. For optimum application properties, bring material to 70-80°F (21-27°C) temperature range prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage between 40° and 74°F (4-23°C). Prolonged atmospheric exposure of this product may detract from performance and reduce shelf life. Technical and application data herein is for the purpose of establishing a general guideline of the coating and proper coating application procedures. As application, environmental and design factors can vary significantly due care should be exercised in the selection, verification of performance, and use of the coating.
- Finish/Sheen
- Gloss
- Technology
- Composite Materials
- Packaging Type
- Jars
- Available Sizes
- Quart, Gallon, 5 Gallon Pail
- Shipping Weight
- 9-11 Lbs./Gal. (Depending on Color)
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Flash Point | 82.0 | °F |
| VOC | 35-42 | % |
| Catalyst Level (MEKP) | 1.2 - 3.0 | % |
| Gel Time (1.8% MEKP Catalyst at 77°F) | 10 - 17 | minutes |
