TALON™

Product families

Other characteristics

Brand

TALON

Features

Anti-Fouling, Durable, High Flowability, Medium Gloss, Medium Hardness, Water Resistant

Product Type

Paint

Application Area

Marine Applications

Application Method

Brush, Roller, Spray

Compatible Substrates & Surfaces

Aluminum, Fiberglass, Metal, Painted Surfaces, Steel, Wood

Color

• Black
• Blue
• Green
• Red

Markets

Automotive & Transportation

Shelf LIfe

30 months when stored under cool, dry conditions

Limitations

Apply in good weather when air and surface temperatures are above 50°F (10° C). Surface temperature must be a least 5°F (1° C) above dew point. For optimum application properties, bring material to 70-80° F (21-27° C) temperature range prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage between 40° and 100°F (4-38° C). Prolonged atmospheric exposure of this product may detract from performance. Technical and application data herein is for the purpose of establishing a general guideline of the coating and proper coating application procedures. As application, environmental and design factors can vary significantly due care should be exercised in the selection, verification of performance, and use of the coating.

Show in full

Finish/Sheen

Semi-Gloss

Technology

Ready-to-Use Products

Shipping Weight

*All colors are not available in all states

Application Data

Mixing

TALON bottom paint contains a moderate concentration of copper oxide and may have settled in transit. Product must be thoroughly mixed with power mixer/shaker until uniform. Additives: You may add a pint of BIOCOP TF for dual-biocide protection.

Induction Time

Not Applicable

Thinning

If necessary, maximum 10% Sea Hawk 2033, 2035 Cleaning: Sea Hawk 2033, 2035, Xylene

Pot Life

Not Applicable

Brush/Rolling

Solvent Resistant Roller Cover 3/8" (10 mm) pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use.

Airless Spray

Minimum 33:1–2 GPM ratio pump; -0.017-0.026" (0.43-0.66 mm) orifice tip; 3/8" ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter.

Conventional Spray

Please contact your Sea Hawk representative for more specific information.

Safety

Prior to use, obtain and consult the "Safety Data Sheet" of this product for health and safety information. Read and observe all precautionary notices on container labels.

Application Methods

• Brush
• Roller
• Spray