To catalogue
1277 Bottom Paint Primer™
1277 Bottom Paint Primer™ is a chlorinated rubber based primer recommended for use over previous copper based antifoulants prior to recoating to insure excellent adhesion. High build, corrosion resistant, for use on new or old metal and fiberglass substrates.
Product families
Ready-to-Use Products — Paints & Coatings
- Primers & Sealers
Other characteristics
- Brand
- 1277 Bottom Paint Primer
- Features
- Corrosion Resistant, Good Adhesion
- Product Type
- 1K (1 component) Coating, Primer
- 1K (1 component) Coating
- Primer
- Application Area
- Marine Applications
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Fiberglass, Metal
- Color
- Yellow
- Markets
- Automotive & Transportation
- Equipment
- Brush
- China Bristle
- Roller
- Solvent Resistant Roller Cover 3/8" (10 mm) pile smooth to medium. Prewash Roller Cover to remove loose fibers prior to use.
- Application
- Apply by brush, roller or spray. Apply 6 mils wet, which will yield 2 mils dry per coat.
- Airless Spray
- Minimum 30:1 ratio pump; 1 GPM 0.013"-0.023" (0.33-0.58 mm) orifice tip; 1/4" (6.35 mm) ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter.
- Thinning
- If thinning is necessary, thin up to a maximum of 10%, with Sea Hawk 2044.
- Cleaning
- Clean all equipment immediately after use with Sea Hawk 2031. It is a good practice to periodically flush out spray equipment during the course of the day. Frequency should depend upon amount sprayed, temperature, elapsed time including delay, etc.
- Safety
- Prior to use, obtain and consult the "Safety Data Sheet" of this product for health and safety information. Read and observe all precautionary
- Limitations
Apply in good weather when air and surface temperatures are above 50°F (10°C). Surface temperature must be a least 5°F (1°C) above dew point. For optimum application properties, bring material to 70-80°F (21-27°C) temperature range prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage between 40° and 100°F (4-38°C). Prolonged atmospheric exposure of this product may detract from performance.
- Finish/Sheen
- Flat
- Technology
- Ready-to-Use Products
- Shipping Weight
- 10.29 lbs./gal. (4.66 kg/Gal)
- Application Methods
- Brush
- Roller
- Spray
- Benefits and Features
- Compatible Over Existing Antifoulants
- No Other Comparable Product on the Market
- No Overcoat Window
- Best Adhesion Promoter in the industry
Technical data
Table 1 of 1
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Volume Solids | 29 - 33 | % |
| Flash Point | 80.0 | °F |
| VOC | 594.0 | Grams/Liter |
