MISSION BAY™
MISSION BAY™ a copper-Free, self-polishing, ablative antifoulant. When exposed to UV light, the Nano-Based technology copolymer releases the active nonmetal biocide which dissipates in seconds without bioaccumulation into the environment. Mission Bay may be used on aluminum hulls without the use of a traditional barrier coat system.
Product families
- Other Paints & Coatings
Other characteristics
- Brand
- MISSION BAY
- Features
- Anti-Fouling, High Strength, Medium Gloss
- Product Type
- 1K (1 component) Coating
- Application Area
- Marine Applications
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
Aluminum, Fiberglass, Metal, Painted Surfaces, Steel, Wood
- Color
- Black
- Blue
- Green
- Red
- White
- Markets
- Automotive & Transportation
- Limitations
Apply in good weather when air and surface temperatures are above 50° F (10° C). Surface temperature must be a least 5° F (1° C) above dew point. For optimum application properties, bring material to 70-80° F (21-27° C) temperature range prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage between 40° and 100°F (4-38° C). Prolonged atmospheric exposure of this product may detract from performance. Technical and application data herein is for the purpose of establishing a general guideline of the coating and proper coating application procedures. As application, environmental and design factors can vary significantly due care should be exercised in the selection, verification of performance, and use of the coating.
- Finish/Sheen
- Semi-Gloss
- Technology
- Ready-to-Use Products
- Labeling Claims
- Environmentally Friendly
- Tin-free
- Shipping Weight
- *All colors are not available in all states
- Application Data
- Mixing
- MISSION BAY bottom paint contains a moderate concentration of Biocides and may have settled in transit. Product must be thoroughly mixed with power mixer/shaker until uniform.
- Induction Time
- Not Applicable
- Thinning
- If necessary, maximum 10% Sea Hawk 2033, 2035 Cleaning: Sea Hawk 2033, 2035, Xylene
- Pot Life
- Not Applicable
- Brush/Rolling
- Solvent Resistant Roller Cover 3/8" pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use. Airless Spray: Minimum 33:1–2 GPM ratio pump; 0.017"-0.026" orifice tip; 3/8" ID high-pressure material hose; 90 PSI line pressure; 60 mesh filter.
- Conventional Spray
- Please contact your Sea Hawk representative for more specific information.
- Safety
- Prior to use, obtain and consult the "Safety Data Sheet" of this product for health and safety information. Read and observe all precautionary notices on container labels.
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Copper Content | 0.0 | % |
| Volume Solids | 43 - 47 | % |
| Flash Point | 105.0 | °F |
| VOC | 298.0 | Grams/Liter |
