Islands 99 plus™
Islands 99 plus™ is a tin free antifouling paint with polishing action in service and long protection against marine organisms. The specific vehicle composition provides long lasting antifouling and polishing action.
Product families
- Other Paints & Coatings
Other characteristics
- Brand
- Islands 99 plus
- Features
Anti-Fouling, High Strength, Medium Gloss, Service Life Extension
- Product Type
- Paint
- Application Area
- Marine Applications
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
Aluminum, Fiberglass, Metal, Painted Surfaces, Steel, Wood
- Color
- Black
- Blue
- Markets
- Automotive & Transportation
- Shelf LIfe
- 2 years
- Limitations
Apply in good weather when air and surface temperatures are above 50° F (10°C). Surface temperature must be a least 10°F above dew point. For optimum application properties, bring material to 70-80° F (21-27°C) temperature range prior to mixing and application. Unmixed material (in closed containers) should be maintained in protected storage between 40° and 100° F (4-38° C). Prolonged atmospheric exposure of this product may detract from performance. Technical and application data herein is for the purpose of establishing a general guideline of the coating and proper coating application procedures. As application, environmental and design factors can vary significantly due care should be exercised in the selection, verification of performance, and use of the coating.
- Finish/Sheen
- Semi-Gloss
- Technology
- Ready-to-Use Products
- Labeling Claims
- Tin-free
- Shipping Weight
- 14-15 lbs/gallon (6.35-6.8 kg/gallon)
- Application Data
- Mixing
- Islands 99 plus antifouling paint contains a low concentration of copper oxide and may have settled in transit. Product must be thoroughly mixed with power mixer/shaker until uniform.
- Induction Time
- N/A
- Thinning
- If necessary, maximum 10%Sea Hawk 2031 Reducer
- Cleaning
- Sea Hawk 2033
- Pot Life
- Not Applicable
- Brush/Rolling
- Solvent Resistant Roller Cover 3/8" pile (nap), smooth to medium. Prewash roller cover to remove loose fibers prior to use.
- Airless Spray
- Minimum 33:1–2 GPM ratio pump; 0.017"-0.026" (0.43-0.66 mm) orifice tip; 3/8" (9.5 mm) ID high-pressure material hose; 90 PSI (620.5 kPa) line pressure; 60 mesh filter.
- Conventional Spray
- Please contact your Sea Hawk representative for more specific information.
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 1
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Volume Solids | 56.0 | % |
| Solids by Weight | 75.0 | % |
| Flash Point | 100.0 | °F |
| VOC | 400.0 | Grams/Liter |
