Excellent Coatings Excel-Coat #200
- Chemical Family
- Acrylics & Acrylates
Excel-Coat #200 is a pigmented texture coat that is applied over the Excel-Coat membrane.
Product families
- Top Coats
Other characteristics
- Product Type
- 1K (1 component) Coating, Top Coat
- 1K (1 component) Coating
- Top Coat
- Application Method
- Roller
- Cost
Cost data is available from your local Excellent Coatings International authorized representative.
- Color
Custom. Excel-Coat #200 texture coat is available in 20 standard colors. Custom color matching is available upon request at an additional charge. Minimum quantities and guaranteed overages may apply.
- Grade
The Excel-Coat #200 texture coat is an acrylic resin mixed with fine aggregate and fibers to provide an intermediate texture coat over the Excel-Coat membrane.
- Markets
- Paints & Coatings
- PACKAGING
The Excel-Coat #200 Finish Coat is available in 1 and 5 gallon containers (U.S. gallon measures).
- Shelf LIfe
Twelve months from shipping date; stored below 80°F. Do not allow product to freeze.
- Availability
Immediately available from Excellent Coatings International and authorized distributors.
- Composition
Excel-Coat #200 is a single component acrylic texture material.
- Limitations
Not for areas intended for vehicular traffic.; Do not apply in constantly submerged conditions such as reflecting ponds or tank linings.; Do not apply over non-structural lightweight concrete without prior written approval.
- Maintenance
Cleaning can be accomplished by scrubbing with normal detergent soap and water. Heavy stains may require TSP solution or Excel-Coat Maintenance Cleaner following product instructions.
- Applications
Paints & Coatings — Other Paints & Coatings Applications
- Installation
PREPARATION: 1. To apply Excel-Coat #200 texture coat the Excel-Coat membrane (fiberglass and Excel-Coat #1) shall be installed, cured, clean, and detailed so that surface is pinhole free and smooth. 2. All decks shall be properly sloped to freely drain and eliminate the ponding of water. All expansion joints shall be treated as specified in the drawings, and in strict accordance with Excellent Coatings International's written instructions. Excellent Coatings International shall be consulted for specific design requirements.
- Technology
- Ready-to-Use Products
- Job Conditions
Before any work is started, the applicator shall thoroughly examine all surfaces for any deficiencies. Should any deficiencies exist, the Architect, Owner or General Contractor shall be notified in writing and any corrections necessary shall be made. Cold or inclement weather will effect the cure time of all Excel-Coat products. Do not install over wet substrate, in the rain or if the threat of rain exists within 24 hours.
- Application Methods
- Roller
