To catalogue

Excellent Coatings Excel-Coat Glaze Clear Sealer

Chemical Family
Acrylics & Acrylates

Excel-Coat Glaze Clear Sealer is a clear top coat that is specifically designed for interior or exterior pedestrian traffic areas such as walking decks, balconies, patios, stairways, and pool areas. Existing Excel-Coat waterproofing systems, such as two-tone textures and Excel-Coat K/D systems, as well as other waterproofing membranes and concrete walking surfaces, are suitable substrates for the Excel-Coat Glaze. Excel-Coat Glaze provides long-lasting protection that is virtually impervious to ultraviolet light and allows for simple surface maintenance.

Product families

Applications

Paints & Coatings — Building & Construction
  • Other Building & Construction Applications

Product Families

Ready-to-Use Products — Paints & Coatings
  • Top Coats

Other characteristics

Features
Good Non-Yellowing Properties
Product Type
  • 1K (1 component) Coating, Top Coat
  • 1K (1 component) Coating
  • Top Coat
Application Method
Roller, Spray
Cost

Cost data is available from your local Excellent Coatings International authorized representative.

Color

Transparent; Excel-Coat Glaze is a clear non-yellowing acrylic top coat.

Grade

The Excel-Coat Glaze is a clear acrylic resin to be used as a top coat. This top coat can be used with all Excel-Coat systems.

Markets
Paints & Coatings
PACKAGING

The Excel-Coat Glaze is available in 1 and 5 gallon containers U.S. gallon measures).

Shelf LIfe

Twelve months from shipping date stored below 80°. Do not allow product to freeze.

Availability

Immediately available from Excellent Coatings, Inc, and authorized distributors.

Composition

Excel-Coat Glaze is a single-component, acrylic polymer clear top coat.

Limitations

Not for areas intended for vehicular traffic.; Do not apply in constantly submerged conditions such as reflecting ponds or tank linings.; Do not apply over non-structural lightweight concrete without prior written approval.; Not recommended as a top coat around pool areas. Refer to the Excel-Coat Acrylic Lacquer Sealer for applications around pool and spa areas.

Maintenance

Cleaning can be accomplished by scrubbing with normal detergent soap and water. Heavy stains may require TSP solution and brushing with a stiff broom. Excel-Coat Maintenance Cleaner is also an effective cleaning material and may be used in conjunction with power washing. Follow product instructions.

Installation

Preparation: 1. Curing of concrete shall be by means of water cure or dissipating compounds. Curing compounds shall be approved by an authorized representative of Excellent Coatings International. 2. Concrete shall be cured a minimum of 28 days prior to installation of the Excel-Coat Glaze unless approved by an authorized representative of Excellent Coatings International. 3. Concrete finish shall be a power metal float followed by a light steel trowel and fine hair broom finish, or equivalent. 4. Concrete surfaces shall be free of excessive roughness, voids, protrusions or exposed aggregate. 5. All tooled joints and control joints shall be caulked with a sealant approved by Excellent Coatings International. Moving structural cracks shall be treated with an epoxy crack repair material. 6. To top coat existing systems, the system must be thoroughly cleaned (power washing with a detergent like TSP or Excel-Coat All Purpose Cleaner is acceptable) and primed. 7. All decks shall be properly sloped to freely drain and eliminate the ponding of water. All expansion joints shall be treated as specified in the drawings and in strict accordance with Excellent Coatings International's written instructions. Excellent Coatings International shall be consulted for specific design requirements.

Technology
Ready-to-Use Products
Job Conditions

Before any work is started, the applicator shall thoroughly examine all surfaces for any deficiencies. Should any deficiencies exist, the Architect, Owner or General Contractor shall be notified in writing and any corrections necessary shall be made. Cold or inclement weather will affect the cure time of all Excel- Coat products. Do not install over wet substrate, in the rain or, if the threat of rain exists within 24 hours.

The Omnichem website uses cookies. By continuing to use the site, you consent to their use in accordance with our Privacy Policy and to the collection of analytics.