Excellent Coatings Excel-Coat Acrylic Lacquer Sealer
- Chemical Family
- Acrylics & Acrylates
Excel-Coat Acrylic Lacquer Sealer is intended to provide a clear top coat for interior and exterior areas such as walking decks, balconies, patios, stairways, driveways, and pool areas. Existing Excel-Coat K/D & K/D II systems and two-tone textures, as well as stamped concrete surfaces, are suitable substrates for the Excel-Coat Acrylic Lacquer Sealer. Excel-Coat Acrylic Lacquer Sealer provides long-lasting protection and easy surface maintenance.
Product families
Applications
- Other Building & Construction Applications
Product Families
- Top Coats
Other characteristics
- Features
- Good Surface Gloss
- Product Type
1K (1 component) Coating, Solventborne Coating, Top Coat; 1K (1 component) Coating; Solventborne Coating; Top Coat
- Application Method
- Roller, Spray
- Cost
Cost data is available from your local Excellent Coatings International authorized representative.
- Color
Transparent; Excel-Coat Acrylic Lacquer Sealer is a clear topcoat available in a gloss finish.
- Grade
The Excel-Coat Acrylic Lacquer Sealer is a solvent-based lacquer to be used as a topcoat. This top coat can be used with Excel-Coat K/D & K/D II decorative cementitious systems.
- Carrier
- Solvent-based
- Markets
- Paints & Coatings
- PACKAGING
The Excel-Coat Acrylic Lacquer Sealer is available in 1 and 5 gallon containers (U.S. gallon measures).
- Shelf LIfe
Twelve months from shipping date when stored indoors below 80° F.
- Composition
Excel-Coat Acrylic Lacquer Sealer is a single-component, solvent based clear top coat
- Limitations
Do not apply in constantly submerged conditions such as reflecting ponds or tank linings.. Do not apply over non-structural lightweight concrete without prior written approval.
- Maintenance
Cleaning can be accomplished by scrubbing with normal detergent soap and water. Heavy stains may require TSP solution and brushing with a stiff broom. Excel-Coat Maintenance Cleaner is also an effective cleaning material and may be used in conjunction with power washing. Follow product instructions.
- Installation
Preparation: 1. Curing of concrete shall be by means of water cure or dissipating compounds. Curing compounds shall be approved by an authorized representative of Excellent Coatings International 2. Concrete shall be cured a minimum of 28 days prior to installation of the Excel-Coat Acrylic Lacquer Sealer unless approved by an authorized representative of Excellent Coatings International. 3. Concrete finish shall be a power metal float followed by a light steel trowel and fine-medium hair broom finish, or equivalent. 4. Concrete surfaces shall be free of excessive roughness, voids, protrusions or exposed aggregate. 5. All tooled joints and control joints shall be caulked with a sealant approved by Excellent Coatings International. Moving structural cracks should be treated with an epoxy crack repair material. To top coat existing systems, the system must be thoroughly cleaned (power washing with a detergent like TSP is acceptable) and primed. 6. All decks shall be properly sloped to freely drain and eliminate the ponding of water. All expansion joints shall be treated as specified in the drawings and in strict accordance with Excellent Coatings International's written instructions. Excellent Coatings International shall be consulted for specific design requirements.
- Technology
- Ready-to-Use Products
- Job Conditions
Before any work is started, the applicator shall thoroughly examine all surfaces for any deficiencies. Should any deficiencies exist, the Architect, Owner or General Contractor shall be notified in writing and any corrections necessary shall be made. Cold or inclement weather will affect the cure time of all Excel-Coat products. Do not install over wet substrate, in the rain or if the threat of rain exists within 24 hours.
