Excellent Coatings Excel-Coat #300
- Chemical Family
- Acrylics & Acrylates
Excel-Coat #300 is specifically designed to provide a color top coat for interior or exterior pedestrian traffic areas such as walking decks, balconies, patios, stairways, and pool areas. Existing Excel-Coat waterproofing systems, as well as other waterproofing membranes and concrete walking surfaces, are all suitable substrates for the Excel-Coat #300. Excel-Coat #300 provides long-lasting protection, is UV stable, and allows for simple surface maintenance.
Product families
Applications
- Other Building & Construction Applications
Product Families
- Top Coats
Other characteristics
- Features
- Durable, Good UV Stability, Long Term Protection
- Product Type
- 1K (1 component) Coating, Top Coat
- 1K (1 component) Coating
- Top Coat
- Application Method
- Roller, Spray
- Cost
Cost data is available from your local Excellent Coatings International authorized representative.
- Color
Custom; Transparent; Excel-Coat #300 seal coat is available in 20 standard colors. Custom color matching is available upon request at an additional charge. Minimum quantities and guaranteed overages may apply.
- Grade
The Excel-Coat #300 seal coat is an acrylic resin to be used as a topcoat.
- Markets
- Paints & Coatings
- PACKAGING
The Excel-Coat #300 is available in 1 and 5 gallon containers (U.S. gallon measures).
- Shelf LIfe
Twelve months from shipping date; stored below 80°F. Do not allow product to freeze.
- Availability
Immediately available from Excellent Coatings International and authorized distributors.
- Composition
Excel-Coat #300 is an acrylic polymer, single-component, color top coat.
- Limitations
Not for areas intended for vehicular traffic.; Do not apply in constantly submerged conditions such as reflecting ponds or tank linings.; Do not apply over non-structural lightweight concrete without prior written approval.
- Maintenance
Cleaning can be accomplished by scrubbing with normal detergent soap and water. Heavy stains may require TSP solution and brushing with a stiff broom. Excel-Coat Maintenance Cleaner is also an effective cleaning material and may be used in conjunction with power washing. Follow product instructions.
- Installation
Preparation: 1. To top coat existing systems, the system must be thoroughly cleaned (Power washing with a detergent like Excel-Coat Maintenance Cleaner is acceptable) and primed. 2. All decks shall be properly sloped to freely drain and eliminate the ponding of water. All expansion joints shall be treated as specified in the drawings, and in strict accordance with Excellent Coatings International's written instructions. Excellent Coatings International shall be consulted for specific design requirements.
- Technology
- Ready-to-Use Products
- Job Conditions
Before any work is started, the applicator shall thoroughly examine all surfaces for any deficiencies. Should any deficiencies exist, the Architect, Owner or General Contractor shall be notified in writing and any corrections necessary shall be made. Cold or inclement weather will effect the cure time of all Excel-Coat products. Do not install over wet substrate, in the rain or if the threat of rain exists within 24 hours.
- Application Methods
- Roller
- Spray
