Excellent Coatings Excel-Coat Primer 120-CA

Product families

Other characteristics

Features

Water Resistant

Product Type

2K (2 component) Coating, Epoxy Coating, Primer, Waterborne Coating; 2K (2 component) Coating; Epoxy Coating; Primer; Waterborne Coating

Application Method

Brush, Roller

Compatible Substrates & Surfaces

Concrete, Painted Surfaces

Cost

Cost data is available from your local Excellent Coatings International authorized representative.

Grade

Excel-Coat Primer 120 or 120-CA Part A – Base Resin; Excel-Coat Primer 120 or 120-CA Part B - Hardener

Carrier

Water

Markets

Printing & Packaging

PACKAGING

Excel-Coat Primer 120 is available in 1 & 2 gallon kits. Excel Coat Primer 120-CA is the California VOC Compliant formula and is available in 1 gallon kits.

Shelf LIfe

Twelve months from manufacturing date stored below 80°F and above 35°F. Do not allow product to freeze.

Availability

Immediately available from Excellent Coatings International and authorized distributors.

Composition

Excel-Coat Primer 120 is a two-component, liquid applied, water-borne epoxy primer designed for concrete, existing decorative coatings and textured waterproofing systems.

Limitations

Do not allow product to freeze.; Do not apply to surfaces which are designated as wet areas.

Maintenance

Cleaning can be accomplished by scrubbing with detergent soap and water. Heavy stains may require TSP solution and brushing with a stiff broom.

Technology

Ready-to-Use Products

Job Conditions

Applicator shall thoroughly examine all surfaces for any deficiencies. Should any deficiencies exist, the Architect, Owner or General Contractor shall be notified in writing and any corrections necessary shall be made. The surface temperature of the substrate should be a minimum of 45°F.

Application Methods

• Brush
• Roller

Guarantee/Warranty

Excellent Coatings International warrants Excel-Coat Primer 120 to be free of defects and manufactured to meet published physical properties for a period of one year following the date of shipment, provided that the product has been applied according to the manufacturer's instructions. Under this warranty, Excellent Coatings International will provide, at no charge, product in containers to replace any product proved to be defective in applications recommended by us as suitable for this product. All claims concerning the product's defects must be made within twelve months of shipment and within thirty days of discovery. Absence of such claims in writing during this period will constitute a waiver of all claims with respect to such product. THIS WARRANTY IS MADE IN LIEU OF ANY AND ALL OTHER WARRANTIES, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A SPECIFIC PURPOSE.

Show in full

Storage and Handling

Store Excel-Coat products in a cool, dry area and protect from freezing. Partial containers can be resealed if the two parts have not been mixed. Should a top skin develop on the remaining contents of a container, the physical properties and effectiveness of the contents will not be impaired. Clean mixing and application tools with water. Dispose of empty containers properly according to current Local, State and Federal regulations.

Show in full