To catalogue
AFT Fluorotec AF201 Carbon Filled PTFE
- Chemical Family
- Fluoropolymers
AFT Fluorotec AF201 Carbon Filled PTFE is the addition of carbon to PTFE increases the compressive strength and wear resistance. It provides good thermal conductivity and low permeability. Commonly used in sealing applications.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics; Food & Nutrition — Other Food & Nutrition Applications
Automotive & Transportation — Automotive
- Cooling & Climate
- Fuel Systems
Building & Construction — Building Materials
- Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
- Automotive Electronics
Healthcare & Pharma — Medical
- Laboratory & Diagnostics
- Medical Devices & Assemblies
- Other Medical Applications
- Surgical Instruments & Trays
Electrical & Electronics — Parts & Components
- Connectors
- Other Parts & Components
Electrical & Electronics — Wire & Cable
- Jacketing & Insulation
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Fillers Included
- Carbon Powder
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Food & Nutrition
- Healthcare & Pharma
- Industrial
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Conductive
- Cost Effective
- Electrically Conductive
- Excellent Elasticity
- Good Compressive Strength
- Good Thermal Conductivity
- Low Elongation
- Plastics and Elastomers End Uses
- Bearings
- Conveyors
- Filters
- Gaskets
- Labware
- Machine/Mechanical Parts
- Medical Devices
- Medical/Healthcare Applications
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Specific Gravity | 2.05 – 2.12 | g/cm3 | ASTM D 792 |
| Tensile Strength | 20-30 | MPa | ASTM D 4894 |
| Elongation | 90 - 300 | % | ASTM D 4894 |
| Shore D Hardness | 60 - 66 | — | ASTM D 2240 |
| Deformation Under Load | 5 – 7 | % | ASTM D 695 |
| Permanent Deformation | 2 – 4 | % | ASTM D 695 |
| Flexural Modulus | 1105.0 | MPa | — |
| Coefficient of Static Friction | 0.14 – 0.16 | — | — |
| Coefficient of Dynamic Friction | 0.12 – 0.14 | — | — |
| Volume Resistivity | 10^-4 | Ohm / CM | ASTM D 257 |
| Service Temperature | -200 /+260 | °C | — |
