AFT Fluorotec AF1302 HN900-B85-RGD
- Chemical Family
- Nitrile Rubbers
AFT Fluorotec AF1302 HN900-B85-RGD is a black hydrogenated acrylonitrile-butadiene-rubber commonly referred to as H- NBR. Good physical characteristics and chemical resistance to the most common hydraulic fluids, high addivated oils, sour oils/gasses (H2S) and crude oils. HN900-B85-RGD has been optimized to withstand the risk of rapid gas decompression (RGD) or explosive decompression (ED) which is an essential demand in the oil and gas industry.
Product families
Applications
- Exterior & Body
- Fuel Systems
- Powertrain & UTH
- Pipes & Plumbing
- Other Industrial Applications
- Other Devices & Assemblies
- Other Oil Gas & Mining Applications
Product Families
- Nitrile Rubbers
Other characteristics
- End Uses
Ball Valves, Bearings, Fasteners, Flanges, O Rings, Oil/Gas Applications, Pistons, Pumps, Tanks, Valves
- Features
Chemical Resistant, Crosslinkable, Enhanced Physical Properties, Extrusion Resistance, Low Friction, Low Temperature Strength, Rapid Gas Decompression Resistant, Wear Resistant
- Polymer Name
- Acrylonitrile Butadiene Rubber (NBR)
- Markets
- Automotive & Transportation
- Building & Construction
- Electrical & Electronics
- Industrial
- Technology
- Elastomers
- Main Application
Static and dynamic seals (standard and special), wipers, O-rings, back-up rings, flange seals, rotary seals, low friction and wear, high extrusion resistance, compatibility with water, excellent low temp. characteristics.
- Material Features
- Chemical Resistant
- Crosslinkable
- Enhanced Physical Properties
- Extrusion Resistance
- Low Friction
- Low Temperature Strength
- Rapid Gas Decompression Resistant
- Wear Resistant
- Analysis and Evaluation
The properties relate to fundamental values for polyurethane products. Values mentioned above are corresponding to ASTM or DIN standards and have been tested on standardized plates in the laboratory. All immersion tests are made under laboratory conditions.
- Plastics and Elastomers End Uses
- Ball Valves
- Bearings
- Fasteners
- Flanges
- O Rings
- Oil/Gas Applications
- Pistons
- Pumps
Technical data
Table 1 of 1
12 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1,3 | g/cm3 | DIN 53479 |
| Hardness at 20°C | 88.0 | Shore A | DIN 53505 |
| 100% Modulus | 8.3 | N/mm2 | DIN 53504 |
| Tensile strength | 23.2 | N/mm2 | DIN 53504 |
| Elongation at break | 260.5 | % | DIN 53504 |
| Tear strength | 5.1 | kN/m | ISO 34-1 |
| Rebound resilience | 29.0 | % | DIN 53512 |
| Compression set (70°C, 24hr) | 13.4 | % | DIN 53517 |
| Compression set (RT, 72hr ) | 18.9 | % | DIN 53517 |
| Compression set (150°C, 24hr) | 22.7 | % | DIN 53517 |
| Service temperature | -20.0 | °C | — |
| Service temperature | 150.0 | °C | — |
