AF801 PEEK™ 450g
- Chemical Family
- Polyether Ether Ketone (PEEK)
AF801 Peek™ 450G are used in a wide range of oil and gas applications due to the unique combination of properties and range of compounds and unfilled polymers.
Product families
Applications
- Equipment & Parts
- Other Industrial Applications
- Tooling & Moldmaking
- Exploration & Upstream
- Other Oil Gas & Mining Applications
- Jacketing & Insulation
- Other Wire & Cable Applications
Product Families
- High Performance Thermoplastics
Other characteristics
- Brand
- AF801 PEEK
- Polymer Name
- Polyetheretherketone (PEEK)
- Markets
- Electrical & Electronics
- Industrial
- Technology
- Plastics
- Wear Resistance
Excellent friction and wear properties; Specially formulated tribological grades which exhibit outstanding wear resistance over wide ranges of pressure, velocity, temperature and counterface roughness; Excellent resistance to abrasion in sand slurry environments
- Material Features
- Easier Processing
- Fatigue Resistant
- Good Electrical Properties
- Good Erosion Resistance
- Good Mechanical Properties
- High Temperature Resistance
- Hydrolysis Resistant
- Low Creep
- Chemical Resistance
Excellent chemical resistance to hydrocarbons, bases, acids, organic and inorganic reagents even at high temperatures; AF800 PEEK materials are not subject to explosive decompression following high pressure exposure to oil field gasses; Exceptional hydrolysis resistance. AF800 PEEK components retain a high level of mechanical properties when continuously conditioned in water or brine at elevated temperatures and pressures
- Plastics and Elastomers End Uses
- Ball Valves
- Bearings
- Cables
- Connectors
- Fasteners
- Logging While Drilling Tools
- Oil/Gas Applications
- Pipes
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 2
14 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile strength | 100.0 | MPa | ISO 527 |
| Elongation at break | 100.0 | % | ISO 527 |
| Secant modulus | 3.6 | GPa | ISO 527 |
| Flexural strength | 131.0 | MPa | ISO 178 |
| Flexural modulus | 3.9 | GPa | ISO 178 |
| Izod impact strength (notched) | 6.4 | kJ/m2 | ISO 180 |
| Hardness (Rockwell) | 126.0 | R | ASTM D785 |
| Thermal expansion | 4.7 | 10-5/°C | ASTM D696 |
| Limiting oxygen index | 35.0 | % | — |
| Density | 1.32 | g/cm3 | ISO 1183 |
| HDT | 152.0 | °C | ISO |
| RTI | 260.0 | °C | UL 746B |
Table 2 of 2
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Dielectric strength (50 μm film) | 190.0 | kV/mm |
| Comparative tracking index | 150.0 | V |
| Excellent electrical insulation properties | min. 200 | °C |
