To catalogue
AFT Fluorotec AF115 Reinforced PTFE
- Chemical Family
- Fluoropolymers
AFT Fluorotec AF115 Reinforced PTFE material specifically developed for slide bearing and skidway applications. This material comprises a unique blend of filler compounds to give optimum compressive strength whilst retaining very low frictional coefficients. The load bearing characteristics are greatly improved over conventional PTFE materials and the unique blend of fillers means maximum compressive strength whilst still having an extremely low coefficient of friction, regardless of conditions, surpassing other filled PTFE materials. AF115 is also unaffected by UV.
Product families
Applications
Applications
- Consumer Goods — Appliances & Electronics; Food & Nutrition — Other Food & Nutrition Applications
Automotive & Transportation — Automotive
- Cooling & Climate
- Fuel Systems
Building & Construction — Building Materials
- Pipes & Plumbing
Industrial — Chemical & Industrial Manufacturing
- Equipment & Parts
- Other Industrial Applications
Electrical & Electronics — Devices & Assemblies
- Automotive Electronics
Healthcare & Pharma — Medical
- Laboratory & Diagnostics
- Medical Devices & Assemblies
- Other Medical Applications
- Surgical Instruments & Trays
Electrical & Electronics — Parts & Components
- Connectors
- Other Parts & Components
Electrical & Electronics — Wire & Cable
- Jacketing & Insulation
Product Families
Plastics — Engineering & Specialty Polymers
- High Performance Thermoplastics
Other characteristics
- Polymer Name
- Polytetrafluoroethylene (PTFE)
- Fillers Included
- Other Filler
- Markets
- Automotive & Transportation
- Building & Construction
- Consumer Goods
- Electrical & Electronics
- Food & Nutrition
- Healthcare & Pharma
- Industrial
- Technology
- Plastics
- Material Features
- Good Compressive Strength
- Low Friction
- UV Stabilized
- Plastics and Elastomers End Uses
- Bearings
- Conveyors
- Filters
- Gaskets
- Labware
- Machine/Mechanical Parts
- Medical Devices
- Medical/Healthcare Applications
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 1
11 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Deformation Under Load (24 Hr at 23°C 14 Mpa) | 1.0 | % | ASTM D621 |
| Deformation Under Load (1 Hr at 150°C 5 Mpa) | 2.1 | % | ASTM D621 |
| Deformation Under Load (Permanent) | 0.8 | % | ASTM D621 |
| Compressive Strength (1% Strain) | 10.8 | MPa | ASTM D695 |
| Compressive Strength (5% Strain) | 30.0 | MPa | ASTM D695 |
| Compressive Strength (0.2% Offset) | 18.2 | MPa | ASTM D695 |
| Compressive Strength (Tensile Strength) | min. 18 | MPa | ASTM D4894 |
| Temperature Range (Maximum Pressure) | 18.0 | MPa | Non Recessed Design |
| Temperature Range (Maximum Pressure) | 50.0 | MPa | Recessed Design |
| Temperature Range (Coefficient Of Friction (static/dynamic)) | 0.05 / 0.01 | — | Lubricated |
| Temperature Range (Water Absorption) | 0.0 | % | — |
