ResinLab® RC8003
ResinLab® RC8003 anaerobic retaining compounds are designed for use in demanding applications to fill the spaces and surface irregularities between tightly mated cylindrical parts. These products form a tough permanent bond which greatly enhances the torque and pullout strength. They are single component solvent free materials manufactured in a wide variety of viscosities and setting times to satisfy specific bonding applications. This technology increases the reliability and performance of assemblies while reducing dependence upon maintaining costly tight machining tolerances.
Product families
Applications
- Industrial Adhesives & Sealants
- Other Industrial & Assembly Applications
Product Families
- Anaerobic Adhesives
Other characteristics
- Brand
- ResinLab
- Features
- High Reliability
- Product Type
1K (1 component) Adhesive, Anaerobic Adhesive, Solvent free (100% Solids) Adhesive; 1K (1 component) Adhesive; Anaerobic Adhesive; Solvent free (100% Solids) Adhesive
- Color
- Green
- Markets
- Adhesives & Sealants
- Industrial
- Peparation
For best results and optimum adhesive performance, surface should be clean and free from contaminants. Contaminants can be removed by using suitable solvents. When using a cleaning solvent, first check for material compatibility particularly in case of plastics. An easy method for removing contaminants is by using a clean soft cloth and wiping the surface with acetone or alcohol.
- Shelf LIfe
All of the Resinlab anaerobic products have a shelf life of one year when stored at 40 °F. Shelf life at room temperature (72 °F) is a minimum of six (6) months. When stored in a refrigerator, allow the adhesive to gradually warm to room temperature prior to use. Avoid heat or storage over 100 °F, direct sunlight and high moisture areas when storing. Avoid contaminating open containers. Do not return unused adhesive to original container.
- Application
It should be applied in small amounts to one surface only. The absence of oxygen starts the curing process of the polymer. Pressure need only be applied for several seconds. The RC 8000 Series cures rapidly to a moderate strength allowing for bonded parts to be handled within 2 to 40 minutes depending upon which product is chosen.
- Technology
- Ready-to-Use Products
- Handling Precautions
All of the Resinlab Series anaerobic products are non-toxic and do not constitute a health hazard. Normal precautions should be observed. Use in area where there is adequate ventilation. KEEP AWAY FROM CHILDREN. Should eye contact occur, flush with water for 15 minutes and obtain medical attention.
- Ready to Use Product Features
- High Reliability
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit |
|---|---|---|
| Gap Fill (at 25°C) | 5.0 | mil |
| Cure Speed (Full cure, at 25°C) | 8.0 | h |
| Viscosity (at 25°C) | 125.0 | cps |
| Shear Strength (at 25°C) | 3800.0 | psi |
| Temperature Range | -65 to 350 | °F |
| Cure Speed (Fixture, at 25°C) | 10.0 | min |
| S.G. (at 25°C) | 1.1 | — |
