ResinLab® UR7006HV Part A
- Chemical Family
- Urethanes
ResinLab® UR7006HV Part A is an industrial grade urethane adhesive. This is a 45,000 cps to 50,000 cps mixed viscosity version of UR7006. This formulation is designed to cure under ambient conditions to form a clear, flexible material with very good adhesion to polycarbonate.
Product families
- Other Adhesives & Sealants
Other characteristics
- Brand
- ResinLab
- Cure Method
- Air Dry
- Product Type
- 2K (2 component) Adhesive
- Markets
- Adhesives & Sealants
- Cure
- Air Dry
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Instructions
Bring both components to room temperature prior to mixing.; Cartridge format: Mixer should be attached keeping the cartridge vertical and any air pocket purged this way. After the mixer contains material, the mixer tip can be dropped to dispense pre-bleed amount. Attach a new static mixer with each cartridge, then pre-bleed the first 3 inches of dispensed material or until a uniform color is obtained. Maintain adequate velocity during dispensing to ensure complete mixing.; Bulk format: weigh and mix parts A and B accurately and thoroughly, scraping sides of container often. Do not pour from mixing container, transfer to a new container as residual unmixed material may cause a tacky spot on the surface of the casting. Maintain adequate velocity during dispensing to ensure complete mixing.; Allow to cure undisturbed until product is fully gelled or tack-free to the touch.; Clean up uncured resin with suitable organic solvent such as MEK, acetone or other organic solvent.
- Technology
- Ready-to-Use Products
- Packaging Type
- Bulk
- Shelf Life Storage
6 months at 25 °C Bulk.; 12 months at 25 °C in cartridges that are foil bagged and desiccant packed.; Isocyanates are sensitive to moisture and should be kept in their original container or in a volume tank under dry nitrogen blanketing. Many isocyanates are prone to dimerization, the formation of a white precipitate. Products with minor amounts of this precipitate normally cure to full properties. Storage at 20 +/- 5 C (60 °F to 86 F) is recommended to ensure full shelf life.
- Ready to Use Product Features
- Good Adhesion
- Improved Flexibility
Technical data
Table 1 of 1
22 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mix Ratio | Part A to Part B | — | — |
| Mix Ratio (By Weight) | 0.98:1 | — | — |
| Mix Ratio (By Volume) | 1:1 | — | — |
| Cure Schedule (at 25°C) | 12.0 | h | — |
| Cure Schedule (at 65°C) | 30.0 | min | — |
| Cure Schedule (at 100°C) | 15.0 | min | — |
| Viscosity (Part A,Rheometer parallel plate 25mm at 1/s) | 50000.0 | cps | — |
| Viscosity (Part B,Rheometer parallel plate 25mm at 1/s) | 47000.0 | cps | — |
| Viscosity (Mixed Rheometer parallel plate 25mm at 1/s) | 44000.0 | cps | — |
| Specific Gravity (Part A) | 1.05 | — | — |
| Specific Gravity (Part B) | 1.08 | — | — |
| Specific Gravity (Mixed) | 1.06 | — | — |
