ResinLab® EP1026HP Part A
ResinLab® EP1026HP Part A is a high performance fast setting epoxy adhesive designed for bonding metals, ceramics, glass and most plastics. This product will have good resistance to water, salt spray, inorganic acids and bases and most organic solvents.
Product families
- Other Adhesives & Sealants
Other characteristics
- Brand
- ResinLab
- Cure Method
- Air Dry
- Product Type
- 2K (2 component) Adhesive, Epoxy Adhesive
- 2K (2 component) Adhesive
- Epoxy Adhesive
- Compatible Substrates & Surfaces
- Ceramic, Metal, Plastics
- Markets
- Adhesives & Sealants
- Cure
- Air Dry
- Applications
Adhesives & Sealants — Other Adhesives & Sealants Applications
- Instructions
Bring both components to room temperature prior to mixing.; Cartridge format: Mixer should be attached keeping the cartridge vertical and any air pocket purged this way. After the mixer contains material, the mixer tip can be dropped to dispense pre-bleed amount. Attach a new static mixer with each cartridge, then pre-bleed the first 3 inches of dispensed material or until a uniform color is obtained. Maintain adequate velocity during dispensing to ensure complete mixing.; Bulk format: weigh and mix parts A and B accurately and thoroughly, scraping sides of container often. Do not pour from mixing container, transfer to a new container as residual unmixed material may cause a tacky spot on the surface of the casting. Maintain adequate velocity during dispensing to ensure complete mixing.; Allow to cure undisturbed until product is fully gelled or tack-free to the touch.; Clean up uncured resin with suitable organic solvent such as MEK, acetone or other organic solvent.
- Technology
- Ready-to-Use Products
- Shelf Life Storage
12 months at 25°C; Specialty packaging may be less.; Store cartridges vertically to allow air to accumulate at the tip.; Many epoxy resin systems are prone to crystallization as epoxy resin is a super-cooled fluid. This condition may give the product a gritty or grainy appearance (or hazy in clear products). Products in this state will not usually cure to normal and expected properties. In extreme cases it may appear solid and cured. Fluctuating temperatures (within 5 to 50°C) aggravate this phenomenon. Heating the individual component to 50 to 60°C while stirring can usually restore products to original state. Storage at 25 +/- 10°C is optimum for most products.
- Ready to Use Product Features
- Chemical Resistant
- Excellent Salt Spray Resistance
- Fast Setting
- Water Resistant
- Compatible Substrates and Surfaces
- Ceramic
- Metal
- Plastics
Technical data
Table 1 of 1
28 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Mix Ratio | Part A to Part B | — | — |
| Mix Ratio (By Weight) | 1:1 | — | — |
| Mix Ratio (By Volume) | 1.04:1 | — | — |
| Cure Schedule (at 100°C) | 1.0 | h | — |
| Viscosity (Part A RVT, #5 at 5rpm) | 8000.0 | cps | — |
| Viscosity (Part B) | 15000.0 | cps | — |
| Viscosity (Mixed) | 12500.0 | cps | — |
| Specific Gravity (Part A) | 1.13 | — | — |
| Specific Gravity (Part B) | 1.18 | — | — |
| Specific Gravity (Mixed) | 1.15 | — | — |
| Pot Life | 3.0 - 5.0 | min/20g mass | — |
| Glass Transition Temperature (Tg) | 30.0 | °C | DSC |
