To catalogue
Crosslink Technologies CLH6230
- Chemical Family
- Epoxy & Epoxy Derivatives
Crosslink Technologies CLH6230 is a semi-flexible epoxy casting system. This product was specifically developed for potting/casting of electrical and electronic components. The long pot life of the material makes it suitable for large mass castings or heat induced curing with minimal stress. Product passes Ul 94-Hb In-house flammability testing. for a softer system, Clr 350 is recommended. using the same cure schedule, Clr 3516, a black version of Clr 3517, passed class B, 130C. when tested to Ul 1446.
Product families
Applications
Applications
- Electrical & Electronics — Other Electrical & Electronics Applications
Electrical & Electronics — Packaging & Assembly
- Potting Compounds
Product Families
Plastics — Thermoset Resins
- Epoxies
Other characteristics
- End Uses
Electrical Components, Electrical/Electronic Applications, Encapsulant
- Polymer Name
- Epoxy Resins & Compounds
- Processing Methods
- Casting
- Markets
- Electrical & Electronics
- Shelf LIfe
- 12 Months
- Cure
- Air Dry
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Cure Schedule
- Recommended Cure Schedule at 60 °C - 6 Hrs
- Alternate Cure Schedule at 80 °C - 4 Hrs.
- Material Features
- Filled
- Good Thermal Conductivity
- Long Potlife
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Electrical Components
- Electrical/Electronic Applications
- Encapsulant
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Casting
Technical data
Table 1 of 3
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity | 10 - 30 | cps |
| Specific Gravity | 0.93 - 0.97 | g/cm³ |
Table 2 of 3
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.55 | gm/Cm³ | — |
| Hardness | 82 | Shore D | — |
| Guide To Operating Temperature | 130 | °C | — |
| Linear Shrinkage | 0.003 | In/In | Astm D 2566 |
| Tensile Strength | 3500 | Psi | Astm D 638 |
| Tensile Elongation | 15 | % | Astm D 638 |
Table 3 of 3
4 rows| Characteristic | Value | Unit |
|---|---|---|
| Mix Ratio By Weight (A:B) | 100:10.0 | — |
| Mixed Viscosity at 22°C | 3250 | cps |
| Pot Life Of 200 gm. mass at 60°C | 30 | minutes |
| Gel Time Of 200 gm. mass at 60°C | 90 | minutes |
