To catalogue
Crosslink Technologies CLH5100
- Chemical Family
- Epoxy & Epoxy Derivatives
Crosslink Technologies CLH5100 is a two component heat cured epoxy casting system. The cured product is suitable for outdoor applications. The product passes accelerated in-house ultraviolet testing without chalking. The product passes in-house ul 94-hb flammability testing.
Product families
Applications
Applications
- Electrical & Electronics — Other Electrical & Electronics Applications
Electrical & Electronics — Packaging & Assembly
- Potting Compounds
Product Families
Plastics — Thermoset Resins
- Epoxies
Other characteristics
- End Uses
Electrical Components, Electrical/Electronic Applications, Encapsulant
- Polymer Name
- Epoxy Resins & Compounds
- Processing Methods
- Casting
- Markets
- Electrical & Electronics
- Shelf LIfe
- 12 Months
- Cure
- Air Dry
- Heat Cure
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Cure Schedule
- Recommended Cure Schedule at 125 °C - 4 Hrs
- Alternate Cure Schedule at 150 °C - 2 Hrs.
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Electrical Components
- Electrical/Electronic Applications
- Encapsulant
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Casting
Technical data
Table 1 of 3
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity at 55°C | 100 - 300 | cps |
| Specific Gravity | 1.08 - 1.12 | g/cm³ |
Table 2 of 3
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.7 | gm/Cm³ | — |
| Hardness | 90 | Shore D | — |
| Linear Shrinkage | 0.0094 | In/In | Astm D 2566 |
| Tensile Strength | 9400 | Psi | Astm D 638 |
| Tensile Elongation | 3.4 | % | Astm D 638 |
| HDT | 100 | °C | Astm D 648 |
Table 3 of 3
3 rows| Characteristic | Value | Unit |
|---|---|---|
| Mix Ratio By Weight | 100:23.0 | — |
| Mixed Viscosity at 60°C | 500 | cps |
| Gel Time Of 200 gm. mass at 100°C | 24 | minutes |
