MXBON® LIGHT CURE CYANOACRYLATE 22449
MXBON® LIGHT CURE CYANOACRYLATE 22449 is a odorless light-curing cyanoacrylate adhesive. It is designed for bonding applications that require very rapid fixture, filet cure or surface cure. The UV and visible light cure properties facilitated rapid curing of exposed surface area and makes it a unique product in the world of light-curing adhesive.
Properties
- Physical Form
- Liquid
Product families
- Contact Adhesives
Other characteristics
- Brand
- MXBON
- Cure Method
- Moisture Cure, Radiation Cure
- Product Type
- 1K (1 component) Adhesive, Anaerobic Adhesive
- 1K (1 component) Adhesive
- Anaerobic Adhesive
- Cure
- Ultraviolet (UV) light
- Moisture Cure
- Radiation Cure
- Color
- Transparent
- Markets
- Adhesives & Sealants
- Industrial
- Storage
Keep adhesive in a cool and dry place. The storage temperature is recommended at 8 °C - 24 °C. Shelf life is twelve months from the date of manufacture in the original container under the optimal conditions.
- Chemistry
- Alkoxyethyl Cyanoacrylate with photoinitiator
- Viscosity
- Gel - like
- Appearance
- Transparent, yellow liquid
- Components
- One part requires no mixing
- Technology
- Cyanoacrylate / UV / Visible
- Ready-to-Use Products
- Conversions
(ºC x 1.8) + 32 = ºF kV/mm x 25.4 = V/mil mm / 25.4 = in μm / 25.4 = mil N x 0.225 = lb N/mm x 5.71 = lb/in N/mm2 x 145 = psi MPa x 145 = psi N·m x 8.851 = lb·in N·mm x 0.142 = oz·in mPa·s = cP
- Precaution
1. Avoid contact with skin and eyes. 2. If contact with skin, rinse with water. 3. If adhesive gets into eye, keep eye open and rinse with water thoroughly. Seek medical attention immediately. 4. Keep the material out of children's reach.
- Secondary Cure
- Humidity
- General Information
This product is not recommended for use in pure oxygen and/or oxygen rich systems and should not be selected as a sealant for chlorine or other strong oxidizing materials: Directions for use: 1) This product is light sensitive; exposure to daylight, UV light and artificial light should be kept to a minimum during storage and handling. 2) For best performance bond surfaces should be clean and free from grease. 3) This product performs best in thin bond gaps (0.05 mm) 4) Excess adhesive can be dissolved with nitromethane or acetone.
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity (25°C) | 1.13 | g/cm³ |
| Viscosity, Brookfield DVNXRVCJG, (25 °C) (Spindle 52, 0.3 rpm) | 30000 to 60000 | mPa. s |
