MXBON® LIGHT CURE CYANOACRYLATE 22443
MXBON® LIGHT CURE CYANOACRYLATE 22443 is a odorless light-curing cyanoacrylate adhesive. It is designed for bonding applications that require very rapid fixture, filet cure or surface cure. The UV and visible light cure properties facilitated rapid curing of exposed surface area and makes it a unique product in the world of light-curing adhesive.
Properties
- Physical Form
- Liquid
Product families
- Contact Adhesives
Other characteristics
- Brand
- MXBON
- Cure Method
- Moisture Cure, Radiation Cure
- Product Type
- 1K (1 component) Adhesive, Anaerobic Adhesive
- 1K (1 component) Adhesive
- Anaerobic Adhesive
- Cure
- Ultraviolet (UV) light
- Moisture Cure
- Radiation Cure
- Color
- Transparent
- Markets
- Adhesives & Sealants
- Industrial
- Storage
Keep adhesive in a cool and dry place. The storage temperature is recommended at 8°C - 24°C. Shelf life is twelve months from the date of manufacture in the original container under the optimal conditions.
- Chemistry
- Alkoxyethyl Cyanoacrylate with photoinitiator
- Viscosity
- Medium
- Appearance
- Transparent, yellow liquid
- Components
- One part requires no mixing
- Technology
- Cyanoacrylate / UV / Visible
- Ready-to-Use Products
- Conversions
(ºC x 1.8) + 32 = ºF kV/mm x 25.4 = V/mil mm / 25.4 = in μm / 25.4 = mil N x 0.225 = lb N/mm x 5.71 = lb/in N/mm2 x 145 = psi MPa x 145 = psi N·m x 8.851 = lb·in N·mm x 0.142 = oz·in mPa·s = cP
- Precaution
Avoid contact with skin and eyes.; If contact with skin, rinse with water.; If adhesive gets into eye, keep eye open and rinse with water thoroughly. Seek medical attention immediately.; Keep the material out of children's reach.
- Secondary Cure
- Humidity
- Typical Performance
TACK FREE TIME Tack Free Time is the time in seconds required to achieve a tack free surface. UV/Visible Light Sources: Electrodeless, V bulb: 70 mW/cm2, measured @ 365 nm: < 10 s. Electrodeless, H bulb: 30 mW/cm2, measured @ 365 nm: < 10 s. 100 mW/cm2, measured @ 365 nm: < 10 s. Visible Light Sources: Blue light laser: 70 mW/cm2, measured @ 445 nm: < 10 s. CURE SPEED vs. SUBSTRATE (non-UV/Vis cure) The rate of cure will depend on the substrate used. The table below shows the fixture time achieved on different materials at room temperature. This is defined as the time at which an adhesive bond (250 mm 2 ) is capable of su pporting a 3 kg load for 10 seconds. Fixture time measurements relate to non UV/Visible cure.
Technical data
Table 1 of 1
2 rows| Characteristic | Value | Unit |
|---|---|---|
| Specific Gravity (25°C) | 1.13 | g/cm³ |
| Viscosity (25°C) | 150 - 300 | mPa. s |
