International Chem-Crete Chem-floor 45
- Chemical Family
- Epoxy & Epoxy Derivatives
CHEM-FLOOR 45 is a two component, 100% solids, high modulus, glossy, heavy-duty, epoxy floor coating system. CHEM- FLOOR 45 exhibits excellent chemical resistant to various chemical reagents.
Other characteristics
- Features
Abrasion Resistant, Chemical Resistant, Good Compressive Strength, Good Gloss Retention, High Clarity, High Gloss
- Product Type
2K (2 component) Coating, Epoxy Coating, Solventless & High Solids Coating; 2K (2 component) Coating; Epoxy Coating; Solventless & High Solids Coating
- Application Method
- Brush, Roller
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Building & Construction
- Paints & Coatings
- Storage
The product can be stored for minimum of twelve months at temperature from 50°F to 95°F in the unopened original packaging. Protect from direct sunlight.
- Clean Up
Remove uncured CHEM-CRETE E430 from tools and equipment with suitable solvents such as Xylene, Toluene or CHEM-CRETE BLENDED SOLVENT immediately after use. Cured material may only be removed mechanically.
- PACKAGING
1 Gallon (3.785 Liters) Unit; Part A : 0.75 Gal Can, Part B: 0.25 Gal Can; 5 Gallon (18.925 Liters) Unit; Part A : 4 Gal Pail, Part B: 1 Gal Can; 25 Gallon (94.625 Liters) Unit; Part A : Four 5 Gal Pails, Part B: One 5 Gal Pail
- Technology
- Ready-to-Use Products
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Resin) | 13.2 | lb/gal | ASTM D1475 |
| Mixing Ratio (Resin, by Volume) | 4:1 | — | — |
| Shelf Life (Resin) | 2 Year | — | — |
| Solids (Resin) | 100.0 | % | — |
Table 2 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Hardener) | 8.0 | lb/gal | ASTM D1475 |
| Mixing Ratio (Hardener, by Volume) | 4:1 | — | — |
| Shelf Life (Hardener) | 2 Year | — | — |
| Solids (Hardener) | 100.0 | % | — |
Table 3 of 3
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Adhesion Strength to Concrete | Concrete Failure | — | ASTM D-4541 |
| Compressive Strength (7 days) | 8530.0 | psi | ASTM D-695 |
| Final Cure | 0.08 | days | ASTM D570 |
| Gel Time (60 g) | 45.0 | minutes | ASTM C-881 |
| Hardness | 80.0 | Shore D | ASTM D-2240 |
| Mixed Density | 12.1 | lb/gal | ASTM D-1475 |
| Pot Life (5 kg) | 25.0 | minutes | — |
| Water Absorption (24 hr) | 0.08 | % | — |
