International Chem-Crete Cem310
CEM310 is a ready-to-use, durable, non-metallic, flowable, high strength, cementitious and one component non-shrink grout. It complies to ASTM 1107-Type B. CEM310 comprises of a balanced blend of washed and graded silica sands, finely crushed Portland cement, flow improvement compounds and an inorganic shrinkage compensation additive, which densifies the grout.
Product families
Applications
- Concrete Coatings & Stains
- Other Building Materials
- Repair & Rehabilitation
Product Families
- Mortar & Grouts
Other characteristics
- Features
Cementitious, Durable, Good Shrinkage Resistance, High Flow, High Performance, High Strength, Low Permeability, Oil Resistant, Stain Resistant
- Product Type
- Grout
- Application Method
- Trowel
- Caution
Measure water accurately to prevent strength reduction. Do not use additives such as retarders, set accelerators, calcium chloride or additional sand. Do not place CEM310 when temperatures are below or expected to fall below -17 to -16°F within 72 hours.
- Markets
- Building & Construction
- Paints & Coatings
- Cleaning
CEM310 should be cleaned from tools, equipment, etc. with clean water immediately after use.
- PACKAGING
- 50 Lb (22.68 kg) Bag
- Shelf LIfe
CEM310 has a shelf life of 12 months when stored in cool and dry conditions in unopened bags.
- Technology
- Ready-to-Use Products
- Product Features
Requires only addition of water.; Easy to mix and apply.; Pumpable with adjustable consistency.; Non-shrink eliminates shrinkage normally encountered in cement systems.; Provides an early high strength.; Contains no ferrous metal, and therefore will not stain due to corrosion.; Resistant to oil and water penetration.; Low permeability.
- Application Methods
- Trowel
- HIGHLIGHTS
CEM310 inorganic shrinkage compensating additive completely fills the voids to make the mix dense, strong and stable grout. CEM310 produces high early and ultimate strengths without intermediate and latent shrinkage. The inorganic shrinkage compensating additive works hardest between initial set and final set reducing normal grout tendencies to drying shrinkage. CEM310 remains stable without failure from compressive loading, impact, lateral thrusts, high heat or continuous vibration.
- Handling Precautions
CEM310 is a non-flammable and non-toxic in nature. Avoid contact with eyes and skin as it may cause irritation due to its alkaline nature. Splashes of CEM310 should be washed off immediately with clean water. Wear necessary gloves and dust mask.
- Ready to Use Product Features
- Cementitious
- Durable
- Good Shrinkage Resistance
- High Flow
- High Performance
- High Strength
- Low Permeability
- Oil Resistant
- Compatible Substrates and Surfaces
- Concrete
Technical data
Table 1 of 1
36 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compressive Strength (Flowable, 1 day) | 3290.0 | psi | ASTM D-695 |
| Compressive Strength (Flowable, 28 days) | 10110.0 | psi | ASTM D-695 |
| Compressive Strength (Flowable, 7 days) | 8500.0 | psi | ASTM D-695 |
| Compressive Strength (Fluid, 1 day) | 2130.0 | psi | ASTM D-695 |
| Compressive Strength (Fluid, 28 days) | 7640.0 | psi | ASTM D-695 |
| Compressive Strength (Fluid, 7 days) | 5790.0 | psi | ASTM D-695 |
| Compressive Strength (Plastic, 1 day) | 4700.0 | psi | ASTM C-109 |
| Compressive Strength (Plastic, 28 days) | 11070.0 | psi | ASTM C-109 |
| Compressive Strength (Plastic, 7 days) | 9110.0 | psi | ASTM C-109 |
| Flexural Strength (Flowable, 1 days) | 1090.0 | psi | — |
| Flexural Strength (Flowable, 28 days) | 1560.0 | psi | — |
| Flexural Strength (Flowable, 7 days) | 1410.0 | psi | — |
