International Chem-Crete Chem-wet 2

Chemical Family: Epoxy & Epoxy Derivatives

CHEM-WET 2 is a two component, 100% solids, high modulus, medium viscosity, moisture insensitive epoxy system. This product meets ASTM C-881.

Product families

Ready-to-Use Products — Paints & Coatings

Protective Coatings

Other characteristics

Features: Fast Curing, Good Shrinkage Resistance, High Modulus, Medium Viscosity, Moisture Resistant
Product Type: 2K (2 component) Coating, Epoxy Coating, Solventless & High Solids Coating; 2K (2 component) Coating; Epoxy Coating; Solventless & High Solids Coating
Application Area: Tanks
Application Method: Brush, Roller, Spray
Compatible Substrates & Surfaces: Concrete, Metal, Steel
Markets: Industrial
Paints & Coatings
Storage: The product can be stored for minimum of twelve months at temperature from +10°C to +35°C in the unopened original packaging. Protect from direct sunlight.
Cleaning: All tools and equipment after use must be cleaned immediately with mineral spirit.
Cure: Moisture Cure
Technology: Ready-to-Use Products
Product Features: 100% solids
Moisture cure
Easy 1: 1 mix ratio
Vertical & horizontal application
No shrinkage
Fast Curing
Application Methods: Brush
Roller
Spray
Safety Precautions: After hardening thoroughly, CHEM-WET 2 is physiologically harmless. Keep the resin and hardener away from the eyes mouth and skin. Do not breathe in the vapors. The uncured mixture can cause irritation of the skin. For best protection, wear rubber or plastic gloves. In case of contamination, wipe away resin or hardener immediately from the skin using paper towels and then wash with soap and water or hand cleaning detergent. Empty resin and hardener cans must be destroyed. Under no circumstances use them to store food or drink even if they have been thoroughly cleaned.

Technical data

Table 1 of 3

4 rows

Characteristic	Value	Unit	Method
Density (Resin)	9.34	lb/gal	ASTM D-1475
Mixing Ratio (Resin, by Volume)	1: 1	—	—
Shelf Life (Resin)	2 Year	—	—
Solids (Resin)	100.0	%	—

Table 2 of 3