International Chem-Crete Chem-HCR
- Chemical Family
- Epoxy & Epoxy Derivatives
CHEM-HCR coating is a two-component, solvent free ep floor coating system that is high in chemical resistance. CHE HCR coating produces a dense tile like coating that will prot walls and floors. CHEM-HCR can be applied on both concr and steel surfaces.
Product families
- Protective Coatings
Other characteristics
- Features
Abrasion Resistant, Anti-Slip, Chemical Resistant, Good Adhesion, High Gloss, Wear Resistant
- Product Type
2K (2 component) Coating, Coating, Epoxy Coating, Solventless & High Solids Coating; 2K (2 component) Coating; Coating; Epoxy Coating; Solventless & High Solids Coating
- Application Method
- Brush, Roller
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel
- Markets
- Building & Construction
- Paints & Coatings
- Storage
The product can be stored for minimum of twelve months at temperature from 50°F to 95°F in the unopened original packaging. Protect from direct sunlight.
- Cleaning
Remove uncured CHEM-HCR from tools and equipment with suitable solvents such as Xylene, Toluene or CHEM-CRETE BLENDED SOLVENT immediately after use. Cured material may only be removed mechanically.
- PACKAGING
- 2 Gallon (7.57 Liters) unit
- Part A: 1 gal can, Part B: 1 gal can
- 10 Gallon (37.58 Liters) unit
- Part A: 5 Gal pail, Part B: 5 gal can
- Technology
- Ready-to-Use Products
- Labeling Claims
- Solvent-free
- Product Features
Ready to use work pack ensures correct mixing and ease of application.; Good wear and abrasion resistance; Slip Resistance; Smooth high gloss finish for hygienic application; Excellent chemical resistance; Limited maintenance; Excellent adhesion to steel and concrete
- Application Methods
- Brush
- Roller
- Safety Precautions
After hardening thoroughly, CHEM-HCR is physiologically harmless. Keep the resin and hardener away from the eyes mouth and skin. Do not breathe in the vapors. The uncured mixture can cause irritation of the skin. For best protection, wear rubber or plastic gloves. In case of contamination, wipe away resin or hardener immediately from the skin using paper towels and then wash with soap and water or hand cleaning detergent. Empty resin and hardener cans must be disposed according to local city code or regulations. Under no circumstances empty cans should be used to store food or drink even if they have been thoroughly cleaned. Follow all cautionary direction as printed on container's labels.
Technical data
Table 1 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Resin) | max. 9.32 | lb/gal | ASTM D1475 |
| Mixing Ratio (Resin, by Volume) | 1 :1 | — | — |
| Shelf Life (Resin) | 2 Year | — | — |
| Solids (Resin) | 100.0 | % | — |
Table 2 of 3
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (Hardener) | max. 13.0 | lb/gal | ASTM D1475 |
| Mixing Ratio (Hardener, by Volume) | 1 :1 | — | — |
| Shelf Life (Hardener) | 2 Year | — | — |
| Solids (Hardener) | 100.0 | % | — |
Table 3 of 3
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Bond Strength to concrete | Concrete Failure | — | ASTM D-4541, Method C |
| Compressive Strength (7 days) | 12038.0 | psi | ASTM D-695 |
| Density | 11.4 | lb/gal | ASTM D1475 |
| Final Cure | 7.0 | days | ASTM D570 |
| Gel Time (60 g) | 28.0 | minutes | ASTM D-2471 |
| Hardness (3 Days) | 84.0 | Shore D | ASTM -2240 |
| Pot Life (3 Oz) | 25.0 | minutes | — |
| Viscosity | 4000.0 | cps | Brookfield |
| Water Absorption (24 hr) | 0.09 | % | ASTM D-570 |
