To catalogue
Nevimid 6 B G10 NERO
- Chemical Family
- Polyamides
Nevimid 6 B G10 NERO is a industrial grade. Its used in Automotive & Agricolture Consumer Goods.
Product families
Applications
Applications
- Consumer Goods — Other Consumer Goods Applications
Agriculture & Feed — Agricultural Films
- Greenhouse & Tunnel Films
- Mulch & Fumigation Films
- Other Agricultural Films
- Silage & Stretch Films
Automotive & Transportation — Automotive
- Exterior & Body
- Interior
- Other Automotive Applications
Product Families
Plastics — Engineering & Specialty Polymers
- Polyamides
Other characteristics
- Brand
- Nevimid
- Polymer Name
- Polyamide 6 (PA 6)
- Fillers Included
- Glass Fiber
- Markets
- Agriculture & Feed
- Automotive & Transportation
- Consumer Goods
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Material Features
- Chemical Resistant
- Excellent Mechanical Strength
- Certifications and Compliance
- UL 94
- Plastics and Elastomers End Uses
- Agricultural Applications
- Automotive Applications
- Automotive Exterior Parts
- Automotive Interior Parts
- Consumer Applications
- Greenhouse Film
- Mulch Film
- Plastics and Elastomers Functions
- Resin
Technical data
Table 1 of 4
9 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Stress at Break at 23°C | 70 | MPa | ISO 527-1/2 |
| Tensile Stress at Break (23°C, 5mm/min) | 70 | MPa | ISO 527-1/2 |
| Tensile Strain at Break at 23°C | 5 | % | ISO 527-1/2 |
| Tensile Strain at Break (23°C, 5mm/min) | 5 | % | ISO 527-1/2 |
| Flexural Maximum Strength at 23°C (2 Mm/Min) | 2800 | MPa | ISO 178 |
| Izod Impact Strength Unnotched at 23°C | 18 | kJ/m2 | ISO 180/1U |
| Izod Impact Strength Unnotched (23°C) | 18 | kJ/m2 | ISO 180/1U |
| Izod Impact Strength Notched at 23°C | 3.5 | kJ/m2 | ISO 180/1A |
| Izod Impact Strength Notched (23°C) | 3.5 | kJ/m2 | ISO 180/1A |
Table 2 of 4
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| VICAT Softening Point (50 N, 50°C/h) | 180 | °C | ISO 306/B |
| VICAT Softening Point (50N, 50°C/h) | 180 | °C | ISO 306/B |
| Heat Deflection Temperature (1,80 MPa - 120°C/h) | 150 | °C | ISO 75-1/-2 |
| Heat Deflection Temperature (1.80 MPa, 120°C/h) | 150 | °C | ISO 75-1/-2 |
Table 3 of 4
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density at 23°C | 1.21 | g/cm3 | ISO 1183 |
| Density (23°C) | 1.21 | g/cm3 | ISO 1183 |
| Shrinkage - Parallel (115mm x 50mm x 3mm) | 0.4 – 0.8 | % | Internal |
| Shrinkage - Parallel (115mm x 50mm x 3mm) | 0.4 - 0.8 | % | Internal |
| Drying Temperature | 80 | °C | — |
| Drying Time | 4 | h | — |
| Melt Temperature | 250 - 280 | °C | — |
| Mould Temperature | 70 - 100 | °C | — |
Table 4 of 4
1 row| Characteristic | Value | Method |
|---|---|---|
| Burning Behaviour | HB | UL94 |
