To catalogue
RTduroid® 6010 2LM Laminates
- Chemical Family
- Fluoropolymers
RT/duroid® 6006/6010LM microwave laminates are ceramicPTFE composites designed for electronic and microwave circuit applications requiring a high dielectric constant. RT/duroid 6006 laminate is available with a dielectric constant value of 6.15 and RT/duroid 6010LM laminate has a dielectric constant of 10.2
Product families
Composite Materials — Prepregs & Molding Compounds
- Laminates
Other characteristics
- Brand
- RTduroid
- Functions
- Laminate
- Reinforcement Material
- Glass Fibers
- Markets
- Automotive & Transportation
- Electrical & Electronics
- Features
High dielectric constant for circuit size reduction; Low loss.; Ideal for operating at X-ban or below; Low Z-axis expansion for RT/duroid 6010LM. Provides reliable plated through holes in multilayer boards; Low moisture absorption for RT/duroid 6010LM. Reduces effects of moisture on electrical loss; Tight εr and thickness control for repeatable circuit performance
- Technology
- Composite Materials
- Material Features
- Chemical Resistant
- Dimensional Stability
- Good Electrical Properties
- Good Mechanical Properties
- Recommended Applications
- Patch Antennas
- Satellite Communications Systems
- Power Amplifiers
- Aircraft Collision Avoidance Systems
- Ground Radar Warning Systems
- Composite Materials Functions
- Laminate
Technical data
Table 1 of 1
30 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectric Constant, εr, Process at 10 MHz | 10.2 ± 0.25 | — | IPC-TM-650 2.5.5.5 |
| Surface Resistivity | 5 x 10^5 | MΩ | IPC-TM-650, 2.5.17.1 |
| Dielectric Constant, εr, Design at 10 MHz | 10.7 | — | IPC-TM-650 2.5.5.5 |
| Volume Resistivity | 5 x 10^6 | MΩ-cm | IPC-TM-650, 2.5.17.1 |
| Dissipation Factor tan d, at 10 GHz | 0.0023 | — | IPC-TM-650 2.5.5.5 |
| Thermal Coefficient of εr | -425 | ppm/°C | IPC-TM-650 2.5.5.5 |
| Tensile Modulus at 23 °C - X axis | 135 | kpsi | ASTM D638 |
| Tensile Modulus at 23 °C - Y axis | 81 | kpsi | ASTM D638 |
| Tensile Ultimate Stress - X axis | 2.4 | kpsi | ASTM D638 |
| Tensile Ultimate Stress - Y axis | 1.9 | kpsi | ASTM D638 |
| Tensile Ultimate Strain - X axis | 9 - 15 | % | ASTM D638 |
| Tensile Ultimate Strain - Y axis | 7 - 14 | % | ASTM D638 |
