TMM® 6 Laminates
TMM® thermoset microwave materials are ceramic, hydrocarbon, thermoset polymer composites designed for high plated-thru-hole reliability stripline and microstrip applications. TMM laminates are available in a wide range of dielectric constants and claddings. The electrical and mechanical properties of TMM laminates combine many of the benefits of both ceramic and traditional PTFE microwave circuit laminates, without requiring the specialized production techniques common to these materials. TMM laminates do not require a sodium napthanate treatment prior to electroless plating.
Product families
- Laminates
Other characteristics
- Brand
- TMM
- Functions
- Laminate
- Technology
- Composite Materials
- HIGHLIGHTS
TMM® thermoset microwave materials are ceramic, hydrocarbon, thermoset polymer composites designed for high plated-thru-hole reliability stripline and microstrip applications. TMM laminates are available in a wide range of dielectric constants and claddings. The electrical and mechanical properties of TMM laminates combine many of the benefits of both ceramic and traditional PTFE microwave circuit laminates, without requiring the specialized production techniques common to these materials. TMM laminates do not require a sodium napthanate treatment prior to electroless plating. TMM laminates have an exceptionally low thermal coefficient of dielectric constant, typically less than 30 ppm/°C. The material's isotropic coefficients of thermal expansion, very closely matched to copper, allow for production of high reliability plated through holes, and low etch shrinkage values. Furthermore, the thermal conductivity of TMM laminates is approximately twice that of traditional PTFE/ceramic laminates, facilitating heat removal. TMM laminates are based on thermoset resins, and do not soften when heated. As a result, wire bonding of component leads to circuit traces can be performed without concerns of pad lifting or substrate deformation. TMM laminates combine many of the desirable features of ceramic substrates with the ease of soft substrate processing techniques. TMM laminates are available clad with 1/2 oz/ft2 to 2 oz/ ft2 electrodeposited copper foil, or bonded directly to brass or aluminum plates. Substrate thicknesses of 0.015" to 0.500" are available. The base substrate is resistant to etchants and solvents used in printed circuit production. Consequently, all common PWB processes can be used to produce TMM thermoset microwave materials
- Recommended Applications
- RF and microwave circuitry
- Power amplifiers and combiners
- Filters and coupler
- Satellite communication systems
- Global Positioning Systems Antennas
- Patch Antennas
- Dielectric polarizers and lenses
- Chip testers
- Composite Materials Functions
- Laminate
Technical data
Table 1 of 1
22 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Dielectric Constant (process) | 6.00 ± 0.080 | — | IPC-TM-650 method 2.5.5.5 |
| Surface Resistivity | 100 x 10^7 | MΩ | ASTM D257 |
| Flexural Modulus (MD) | 1.75 | Mpsi | ASTM D790 |
| Flexural Modulus (MD) | 15.02 | Kpsi | ASTM D790 |
| Dielectric Constant (design) | 6.3 | — | Differential Phase Length Method |
| Volume Resistivity | 1 x 10^8 | MΩ-cm | ASTM D257 |
| Dissipation Factor (process) | 0.0023 | — | IPC-TM-650 method 2.5.5.5 |
| Flexural Modulus (CMD) | 1.75 | Mpsi | ASTM D790 |
| Flexural Modulus (CMD) | 15.02 | Kpsi | ASTM D790 |
| Thermal Coefficient of εr | -11 | ppm/°C | IPC-TM-650 method 2.5.5.5 |
| Insulation Resistance | min. 2000 | Gohm | ASTM D257 |
| Electrical Strength (dielectric strength) | 362 | V/mil | IPC-TM-650 method 2.5.6.2 |
