Chem-Screen® Topcoat (Clear)
Chem-Screen® Topcoat (Clear) is a two-component 97% solids novolac clear coating that can be used either as a coating or filled with paint chips, marble chips, and colored sand mixtures to provide an array of colors and patterns. It is recommended for chemical spill areas, troughs, curbs and tanks. This product has exceptional chemical resistance and good color clarity.
Product families
Applications
- Other Coatings & Finishes
Product Families
- Top Coats
Other characteristics
- Brand
- Chem-Screen
- Features
- Abrasion Resistant, Chemical Resistant, Durable
- Product Type
- 2K (2 component) Coating, Top Coat
- 2K (2 component) Coating
- Top Coat
- Application Area
- Tanks, Troughs
- Tanks
- Troughs
- Application Method
- Brush, Roller, Spray
- Color
- Transparent
- Markets
- Automotive & Transportation
- Priming
A suitable primer should be used before applying this product.; Without primer, porous substrates may cause outgassing and possible surface defects.
- Shelf LIfe
- 1 year (Unopened)
- Precaution
Use with adequate ventilation; Avoid contact with eyes, skin and clothing, wear gloves or protective creams - if skin contact occurs, wash at the first opportunity with soap and water; Eye exposure or inhalation can result in serious medical problems - in the event of eye contact, immediately flush eyes with water and contact a physician; Keep out of the reach of children; For industrial use only
- Technology
- Ready-to-Use Products
- Floor Cleaning
Some cleaners may affect the color of the floor installed.. Test each cleaner in a small area, utilizing your cleaning technique beore cleaning the entire surface.
- Product Mixing
Standard packages are in pre-measured kits and should be mixed as supplied in the kit.; We do not recommend breaking kits down unless suitable weighing equipment or a graduated bucket is available.; After the two parts are combined, mix well with slow-speed mixing equipment such as a jiffy mixer until the material is thoroughly mixed and streak-free.; After mixing, transfer the mixed material to another pail (the transfer pail) and remix it again.; The material in the transfer pail is now ready to be applied on the primed substrate.; Improper mixing may result in product failure.
- Packaging (Kit)
- 1 gallon (3.7 L)
- 5 gallon (18.5 L)
- Product Storage
Continuous storage should be between 60 - 90 °F (15 - 32 °C).; Low temperatures or extreme temperature fluctuations may cause crystallization.; Before use, bring the product to room temperature.
- Curing Schedule
* Time varies depending on air temperature and humidity.
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 1
13 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Strength | 10120.0 | psi | ASTM D 790 |
| Tensile Strength | 6550.0 | psi | ASTM D 638 |
| Hardness | 82.0 | Shore D | — |
| Non-Volatile Content by Weight | 97.0 | % | — |
| Non-Volatile Content by Volume | 96.0 | % | — |
| Clean Up | Using Xylol | — | — |
| Film Thickness | 16 - 18 | mils | — |
| Coverage Rate | 90 - 100 | ft2/gal | — |
| Curing Schedule* (Pot Life, 1.5 gal., 70°F) | 30 - 40 | minutes | — |
| Curing Schedule* (Tack Free, 70°F) | 8 - 12 | hours | — |
| Curing Schedule* (Recoat/Topcoat, 70°F) | 14 - 16 | hours | — |
| Curing Schedule* (Light Foot Traffic, 70°F) | 24.0 | hours | — |
