Tread-Shield® Primer WB
- Chemical Family
- Epoxy & Epoxy Derivatives
Tread-Shield® Primer WB is a multi-functional, water-based, VOC compliant, epoxy primer and finishes coat for concrete floors. This two-component epoxy product is designed for use as a primer for either urethane or epoxy finish coats. Tread-Shield Primer WB can also be used as a stand-alone product for low to medium traffic situations. This can be used as a safe, low odor, non-flammable primer in conjunction with all urethane and roller-applied epoxy concrete floor coatings.
Product families
Applications
- Primers & Lacquers
Product Families
- Primers & Sealers
Other characteristics
- Brand
- Tread-Shield
- Features
- Low Odor, Water-based
- Product Type
- 2K (2 component) Coating, Primer
- 2K (2 component) Coating
- Primer
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Printing & Packaging
- Shelf LIfe
- 1 year (Unopened)
- Application
Most commonly, this product is coupled with 100% solids epoxy finish coats so the entire application is low odor and non-flammable.; In situations where acid conditioning or preparation chemicals are used, this product can be applied to the concrete even before the conditioning products have dried.; Because urethanes are often applied over acid-conditioned floors, Tread-Shield Primer WB is recommended because it accepts surface moisture and can speed up the completion of the installation.; Tread-Shield Primer WB can also be used as its own primer and finish coat where the traffic and chemical exposure is minimal.
- Precaution
Use with adequate ventilation.; Avoid contact with eyes, skin and clothing, wear gloves or protective creams - if skin contact occurs, wash at the first opportunity with soap and water.; Eye exposure or inhalation can result in serious medical problems - in the event of eye contact, immediately flush eyes with water and contact a physician.; Keep out of the reach of children.; For industrial use only.
- Technology
- Ready-to-Use Products
- Product Mixing
This product comes prepackaged by weight.; Kits should be mixed in their entirety.; After the two parts are combined, mix with slow-speed mixing equipment (such as a jiffy mixer) until the material is thoroughly mixed and streak-free.; This product is an emulsion and must be mixed well before using.
- Labeling Claims
- Non-Flammable
- Packaging (Kit)
- 2 gallon (7.5 l)
- 5 gallon (19 l)
- Product Storage
Bring the product to normal room temperature before using.; Continuous storage should be between 60 - 90 °F (16 - 32 °C).
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 1
10 rows| Characteristic | Value | Unit |
|---|---|---|
| Weight Per Gallon (Pigmented, Per Liter) | 9 - 12 | lbs./ gal. |
| Film Thickness (Wet) | 5 - 7 | mils |
| Film Thickness (Dry) | 2 - 3 | mils |
| Set Time* (Tack Free, 70°F) | 5 - 8 | hours |
| Set Time* (Recoat/Topcoat, 70°F) | 7 - 10 | hours |
| Set Time* (Light Foot Traffic, 70°F) | 16 - 24 | hours |
| Set Time* (Full Cure, 70°F) | 2 - 7 | days |
| Coverage (2gallon) | 500.0 | sq.ft. |
| Coverage (5gallon) | 1250.0 | sq.ft. |
| Clean Up | Use Xylol | — |
