Fill-Loc™ Crack Repair
- Chemical Family
- Epoxy & Epoxy Derivatives
Fill-Loc™ Crack Repair is a two-component, VOC compliant, 100% epoxy floor patching product. It is designed to make repairs to small vertical and horizontal surface imperfections prior to applying a thin coating. It will quickly fill and span small cracks without slumping. It can also be used to skim coat over small roughed surface areas.
Product families
Applications
- Fillers Levellers & Joints
Product Families
- Caulks & Sealants
Other characteristics
- Brand
- Fill-Loc
- Product Type
2K (2 component) Sealant, Solvent free (100% Solids) Sealant; 2K (2 component) Sealant; Solvent free (100% Solids) Sealant
- Compatible Substrates & Surfaces
- Concrete
- Mixing
Fill-Loc Crack Repair is a 1:1 mix product.; One portion is off-white the other is dark gray; when mixed properly a uniform gray color with no streaking evident should be obtained.; This color mixing indicator eliminates the chance of soft spots in the crack repair areas.
- Markets
- Building & Construction
- Set Time
* Time and strength vary depending on air temperature and humidity.
- Shelf LIfe
- 1 year (Unopened Container)
- Application
Prior to applying this product, the crack repair area must be clean and dry.; All grease, oil and foreign soil must be cleaned out and the crack allowed to dry thoroughly prior to application.; Mix Part A with Part B in equal portions (1:1) with a putty knife, spatula or slow speed mixing equipment, i.e. jiffy blade until a uniform gray color is obtained with no streaking.; Apply over the cracks with either a trowel or putty knife and smooth tight to the concrete surface.; If overcoating with a urethane or epoxy coating system, product should be tack-free (3 - 5 hours cure time) prior to applying the primers.
- Precaution
Use with adequate ventilation.; Avoid contact with eyes, skin and clothing, wear gloves or protective creams - if skin contact occurs, wash at the first opportunity with soap and water.; Eye exposure or inhalation can result in serious medical problems - in the event of eye contact, immediately flush eyes with water and contact a physician.; Keep out of the reach of children.; For industrial use only.
- Technology
- Ready-to-Use Products
- Packaging (Kit)
- 1 gallon (3.8 L)
- 2 gallon (7.6 L)
- Ready to Use Product Features
- Fast Cure
- Compatible Substrates and Surfaces
- Concrete
Technical data
Table 1 of 1
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Flexural Strength | 8045.0 | psi | ASTM D 790 |
| Tensile Strength | 5600.0 | psi | ASTM D 638 |
| Compressive Strength | 7410.0 | psi | ASTM D 695 |
| Set Time* (Tack Free, 70°F) | 5 - 8 | hours | — |
| Set Time* (Recoat/Topcoat, 70°F) | 8 - 12 | hours | — |
| Set Time* (Light Foot Traffic, 70°F) | 12 - 14 | hours | — |
| Set Time* (Full Cure, 70°F) | 2 - 7 | days | — |
