To catalogue
Formacrom PC PC/ABS
Formacrom PC PC/ABS is used for electric, construction and metal replacement applications. It has good transparency, impact resistance, dimensional stability and esthetic olourability. It is a general purpose injection molding grade.
Product families
Applications
Building & Construction — Building Materials
- Other Building Materials
Electrical & Electronics — Parts & Components
- Other Parts & Components
Product Families
Plastics — Engineering & Specialty Polymers
- Blends & Alloys
Other characteristics
- Brand
- Formacrom PC
- Density
- 1130.0 - 1130.0 kg/m³
- Polymer Name
- PC/ABS Alloy
- Processing Methods
- Injection Molding
- Markets
- Building & Construction
- Electrical & Electronics
- Flame Rating
- UL 94 HB
- Technology
- Plastics
- Material Features
- Dimensional Stability
- Excellent Aesthetics
- Excellent Transparency Properties
- Good Colorability
- High Impact Resistance
- Certifications and Compliance
- ISO 9001
- UL 94
- Plastics and Elastomers End Uses
- Construction Applications
- Electrical Parts
- Plastics and Elastomers Functions
- Resin
- Plastics and Elastomers Processing Methods
- Injection Molding
Technical data
Table 1 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Modulus | 2200.0 | MPa | ISO 527 - 2 |
| Tensile Stress Yield | 52.0 | MPa | ISO 527 - 2 |
| Stress at Break | 45.0 | MPa | ISO 527 - 2 |
| Yield Strain | 4.4 | % | ISO 527 - 2 |
| IZOD Notched Impact Strength (+23°C) | 42.0 | KJ/m2 | ISO 180/1eA |
| IZOD Notched Impact Strength (-30°C) | 30.0 | KJ/ m2 | ISO 180/1eA |
Table 2 of 6
3 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Heat Distortion Temperature (Under 1.8 Mpa Load, HDT A) | 100.0 | °C | ISO 75 - 2 |
| Heat Distortion Temperature (Under 0.45 MPa Load, HDT B) | 122.0 | °C | ISO 75 - 2 |
| Vicat Softening Point (Under 0.49 N Load, Vicat B) | 118.0 | °C | ISO 306 |
Table 3 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Volume Resistivity | 10000000000000.0 | Ω*cm | IEC 60093 |
| Surface Resistivity | 1.0e+15 | Ω | IEC 60093 |
| Comparative Tracking Index | 250.0 | V | IEC 60112 |
| Electric Strength | 35.0 | kV/mm | IEC 60243-1 |
Table 4 of 6
3 rows| Characteristic | Value | Method |
|---|---|---|
| Flammability Rate (0.8 mm thickness) | HB | UL94 |
| Flammability Rate (1.6 mm thickness) | HB | UL94 |
| Flammability Rate (3.2 mm thickness) | HB | UL94 |
Table 5 of 6
4 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Melt Temperature | 245 - 265 | °C | CYLINDER |
| Melt Mold | 60 - 80 | °C | MOLD |
| Drying Temperature | 100.0 | °C | — |
| Dry Time | 2 - 4 | h | — |
Table 6 of 6
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.13 | g/cm3 | ISO 1183 |
| Humidity Absorption | 0.6 | % | Similar ISO 62 |
| Water Absorption (23°C 50% r.U) | 0.2 | % | ISO 62 |
| Melt Volume-Flow Rate (260°C 5 kg) | 12.0 | °C | ISO 1133 |
| Molding Shrinkage (Parallel) | 0.55 - 0.75 | % | ISO 294-4 |
| Molding Shrinkage (Normal) | 0.55 - 0.75 | % | ISO 294-4 |
