QuakeBond™ 401HCAR
QuakeBond™ 401HCAR is a high-quality epoxy novolac coating system with chemical and abrasion resistance. This tightly crosslinked system cures in the presence of moisture and humidity with excellent mechanical properties. It contains no solvents (100% solids, zero VOC) or carcinogens and has minimal odor and toxicity.
Identification
Product families
- Other Paints & Coatings
Other characteristics
- Brand
- QuakeBond
- Features
Abrasion Resistant, Chemical Resistant, Consistent High Quality, Good Mechanical Properties, Low Odor, Low Toxicity
- Product Type
- Solventless & High Solids Coating
- Application Area
- Pipes
- Usage
- Pipelines.
- Channels.
- Tank linings.
- Chemical resistant coating.
- Can be used as saturant for QuakeWrap® fabrics.
- Mixing
Thorough and complete mixing is critical; a jiffy mixer is recommended.; First, mix each component separately.; The proportion of each component at the appropriate ratio by weight (A:B ratio of 100:42).; Pour the hardener (Part B) into the resin (Part A) and mix at 400 - 600 RPM for 3 - 5 minutes.; Use an up and down motion, scraping the mixing container sides and bottom.; Mix no more material than may be applied in 15 minutes.
- Cleanup
Collect with absorbent material, flush with water.; Clean up using acetone or other ketone solvents.; Dispose waste in accordance with local disposal regulations.; Cured materials can only be removed mechanically.
- Markets
- Building & Construction
- Industrial
- Paints & Coatings
- Coverage
Applied at a thickness of 15 mils results in 100 ft² per gallon.; Rough and uneven surfaces result in lower yields.
- PACKAGING
- 3-gallon kits.
- 15-gallon kits.
- 165-gallon drum kit.
- Advantages
High resistance to chemical corrosion and physical abrasion.; Zero VOC.; Minimal odor and toxicity.; Viscosity is well suited for vertical applications.
- Cure
- Moisture Cure
- Limitations
Do not apply to concrete still in the curing process.; Do not apply to substrates at a temperature less than 50°F (10°C).
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Surface Preparation
Substrate surfaces must be structurally sound and free from contaminants such as dust, oil, and dirt.; Surfaces must be shot blasted, abrasively ground, hydro-blasted or mechanically abraded to achieve the required surface profile.; Freestanding water must be removed.
- Shelf Life Storage
Store product in original container in a dry location for up to 12 months at 77°F (25°C).; Liquids should be stored at 45°F - 90°F (7°C - 32°C).
- Chemical Resistance
- For 3-week Immersion:
- Ready to Use Product Features
- Abrasion Resistant
- Chemical Resistant
- Consistent High Quality
- Good Mechanical Properties
- Low Odor
- Low Toxicity
Technical data
Table 1 of 2
7 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Compressive (Cured System) | 12,000 - 14,000 | psi | D695 |
| Flexural (Cured System) | 13,000 - 13,800 | psi | D790 |
| Tensile (Cured System) | 7,000 - 8,000 | psi | D638 |
| Abrasion Wear Index | 457.0 | mg | D4060 |
| Elongation (Cured System) | 3.2 | % | — |
| Water Absorption (Cured System) | max. 1 | % | — |
| Hardness (Cured System) | 85.0 | Shore D | — |
Table 2 of 2
14 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (Resin) | 12000.0 | cps |
| Viscosity (Hardener) | 200.0 | cps |
| Viscosity (Mixed) | 1400.0 | cps |
| Density (Resin) | 10.4 | — |
| Density (Hardener) | 8.7 | — |
| Density (Mixed) | 9.9 | — |
| Specific Gravity (Resin) | 1.25 | — |
| Specific Gravity (Hardener) | 1.05 | — |
| Specific Gravity (Mixed) | 1.19 | — |
| Mix Ratio / Volume | 2:1 | — |
| Work Life | 15.0 | minutes |
| Gel Time | 25.0 | minutes |
