QuakeBond™ 401HCR
QuakeBond™ 401HCR is a high-quality epoxy novolac coating system with chemical resistance. This tightly crosslinked system cures in the presence of moisture and humidity with excellent mechanical properties. It contains no solvents (100% solids, zero VOC) and has minimal odor and toxicity.
Identification
Product families
- Other Paints & Coatings
Other characteristics
- Brand
- QuakeBond
- Features
Chemical Resistant, Consistent High Quality, Good Mechanical Properties, Low Odor, Low Toxicity
- Product Type
- Epoxy Coating, Solventless & High Solids Coating
- Epoxy Coating
- Solventless & High Solids Coating
- Application Area
- Tank Lining
- Application Method
- Roller
- Usage
- Tank linings.
- Chemical resistant coating.
- Can be used as saturant for QuakeWrap® fabrics.
- Mixing
Thorough and complete mixing is critical; a jiffy mixer is recommended.; First, mix each component separately.; The proportion of each component at the appropriate ratio by weight (A:B ratio of 100:42).; Pour the hardener (Part B) into the Resin (Part A) and mix at 400 - 600 RPM for 3 - 5 minutes.; Use an up and down motion, scraping the mixing container sides and bottom.; Mix no more material than may be applied in 15 minutes.
- Cleanup
Collect with absorbent material, flush with water.; Clean up using acetone or other ketone solvents.; Dispose waste in accordance with local disposal regulations.; Cured materials can only be removed mechanically.
- Markets
- Industrial
- Paints & Coatings
- Coverage
Applied at a thickness of 20 mils results in 80 ft² per gallon.; Rough and uneven surfaces result in lower yields.
- PACKAGING
- 3-gallon kits.
- 15-gallon kits.
- 165-gallon drum kit (yields 156 gallons).
- Advantages
Zero VOC.; Minimal Odor and Toxicity.; Viscosity is well suited for vertical applications.
- Cure
- Moisture Cure
- Limitations
Do not apply to concrete still in the curing process.; Do not apply to substrates at a temperature less than 50°F (10°C).
- Technology
- Ready-to-Use Products
- Labeling Claims
- VOC-free
- Application Methods
- Roller
- Shelf Life Storage
Store product in original container in a dry location for up to 12 months at 77°F (25°C).; Liquids should be stored at 45°F - 90°F (7°C - 32°C).
Technical data
Table 1 of 2
6 rows| Characteristic | Value | Unit |
|---|---|---|
| Compressive (Cured System) | 12,000 - 14,000 | psi |
| Flexural (Cured System) | 13,000 - 13,800 | psi |
| Tensile (Cured System) | 7,000 - 8,000 | psi |
| Elongation (Cured System) | 3.2 | % |
| Water Absorption (Cured System) | max. 1 | % |
| Hardness (Cured System) | 85.0 | Shore D |
Table 2 of 2
15 rows| Characteristic | Value | Unit |
|---|---|---|
| Viscosity (Resin) | 12000.0 | cps |
| Viscosity (Hardener) | 200.0 | cps |
| Viscosity (Mixed) | 1400.0 | cps |
| Density (Resin) | 10.4 | — |
| Density (Hardener) | 8.7 | — |
| Density (Mixed) | 9.9 | — |
| Specific Gravity (Resin) | 1.25 | — |
| Specific Gravity (Hardener) | 1.05 | — |
| Specific Gravity (Mixed) | 1.19 | — |
| Mix Ratio / Weight | 100:42 | — |
| Mix Ratio / Volume | 2:1 | — |
| Work Life | 15.0 | minutes |
