Foamjet T
- CASE Ingredients Features
- Good Chemical StabilityGood Mechanical PropertiesHigh ReactivityHigh ViscosityWater Resistance
- Chemical Family
- Polyurethanes (PU)
Foamjet T is high viscosity ultra rapid setting two-component polyurethane resin, to be injected for consolidating and waterproofing of structures subject to strong water ingress
Properties
- Physical Form
- Liquid
Product families
- Polyurethanes (PU)
Other characteristics
- Brand
- Foamjet
- End Uses
- 2K (2 Component) Adhesive
- Features
Good Chemical Stability, Good Mechanical Properties, High Reactivity, High Viscosity, Water Resistance
- Compatible Substrates & Surfaces
- Concrete
- Markets
- Adhesives & Sealants
- Building & Construction
- Storage
Foamjet T can be stored for maximum 1 year in a covered and dry place in its original sealed containers and at temperatures between +5°C and +30°C.
- PACKAGING
5 kg kit (component A = 4 kg - component B = 1 kg); 2.5 kg kit (component A = 2 kg - component B = 0.5 kg).
- Consumption
If the reaction takes place in free expansion, 1 liter of product produces 20 liters of foam. If the reaction is affected in a confined space, consumption depends on the degree of confinement.
- Technology
- CASE Ingredients
- Usage
Waterproofing rock or loose ground diggings, dams, shafts or tunnels where there is strong water ingress.. Waterproofing diaphragm and pile walls even when subject to constant contact with water.
- Packaging Type
- Drums
- Labeling Claims
- Halogen-free
- Adhesive & Sealant Type
- 2K (2 Component) Adhesive
Technical data
Table 1 of 1
8 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (+23°C) | 1.034± 0,026 | g/ml | EN 2811-1 |
| Consistency | Liquid | — | — |
| Viscosity (rotor 2 - 20 revs) | 471 ± 94 | mPa•s | UNI EN 3219 |
| Foaming Ratio | 3 - 10 | — | — |
| Reaction Start | 10.0 | minutes | — |
| Reaction End | 3.0-3.30 | hours | — |
| Temperature | 25.0 | °C | — |
| Water Content | 10.0 | g | — |
