Foamjet F
Foamjet F is ultra rapid setting two-component polyurethane resin with fluid consistency, to be injected for consolidating and waterproofing of structures subject to weal water ingress.
Properties
- Physical Form
- Liquid
Product families
- Epoxies
Other characteristics
- Brand
- Foamjet
- End Uses
- 2K (2 Component) Adhesive
- Features
Chemical Resistance, Excellent Electrical Insulation, Good Mechanical Properties, Low Viscosity, Water Resistance
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel
- Markets
- Adhesives & Sealants
- Building & Construction
- Storage
Foamjet F can be stored for maximum 1 year in a covered and dry place in its original sealed containers and at temperatures between +10°C and +30°C.
- PACKAGING
5 kg kit (component A = 4 kg - component B = 1 kg); 2.5 kg kit (component A = 2 kg - component B = 0.5 kg).
- Consumption
If the reaction takes place in free expansion, 1 liter of product produces 20 liters of foam. If the reaction is affected in a confined space, consumption depends on the degree of confinement.
- Technology
- CASE Ingredients
- Usage
Consolidating rock subject to water ingress.; Consolidating water-saturated ground.; Waterproofing concrete structures and cracked walls subject to water ingress, also under pressure.; Repair of concrete structures or cracked walls also in the presence of water ingress or saturated with humidity.
- Packaging Type
- Drums
- Labeling Claims
- Chlorofluorocarbon (CFC)-Free
Technical data
Table 1 of 1
6 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density (+23°C) | 1.1 | g/cm3 | EN 2811-1 |
| Consistency | Liquid | — | — |
| Viscosity (rotor 2 - 20 revs) | 310 ± 62 | mPa•s | UNI EN 3219 |
| Foaming Factor | app. 20 times the initial volume | — | — |
| Reaction Start | max. 10 | minutes | — |
| Time Required to Harden | 3 - 5 | minutes | — |
