To catalogue
Epojet
- Chemical Family
- Epoxy & Epoxy Derivatives
Epojet is two-component, super-fluid epoxy resin for injections and anchorings.
Properties
- Physical Form
- Liquid
Product families
CASE Ingredients — Resins & Binders
- Epoxies
Other characteristics
- Brand
- Epojet
- End Uses
- 2K (2 Component) Adhesive, Epoxy Sealant
- Features
Good Mechanical Properties, Low Viscosity, Water Resistance
- Compatible Substrates & Surfaces
- Concrete, Metal, Steel
- Glass Transition Temperature (Tg)
- 45.0 - 45.0 °C
- Markets
- Adhesives & Sealants
- Building & Construction
- Storage
24 months if stored in its original packaging. Keep the product stored in an area with a temperature not below +5°C.
- PACKAGING
- 4 kg kits (component A
- 3.2 kg - component B : 0.8 kg)
- 2.5 kg kits (component A
- 2 kg - component B : 0.5 kg).
- Technology
- CASE Ingredients
- Usage
Monolithic repair of structures with cracks or fissures caused by heavy loads, accidental impacts and earthquakes.; Bonding and reinforcement of structures by low pressure injection.; Precise anchoring of metallic structures.
- Packaging Type
- Drums
- Recommendations
Do not use Epojet at temperatures below +5°C.; Do not apply Epojet to wet surfaces.; Do not apply Epojet on dusty, friable or weak substrates.; Do not use Epojet for sealing expansion joints
- Application Methods
- Pour
Technical data
Table 1 of 1
30 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | 1.15 | g/cm3 | — |
| Consistency | Liquid | — | — |
| Brookfield Viscosity (rotor 2 - 20 revs) | 500.0 | mPa•s | — |
| Consistency of Mix (at +23°C and 50% R.H.) | fluid liquid | — | — |
| Color of Mix (at +23°C and 50% R.H.) | Transparent yellow | — | — |
| Density of Mix (at +23°C and 50% R.H.) | 1.14 | kg/l | — |
| Brookfield Viscocity (at +23°C and 50% R.H. (rotor F - 5 revs)) | 380.0 | Pa.s | — |
| Workability Time (at +23°C) | 40.0 | minutes | EN ISO 9514 |
| Workability Time (at +30°C) | 20.0 | minutes | EN ISO 9514 |
| Setting Time (at +23°C) | 4.0 | hours | — |
| Setting Time (at +30°C) | 3.0 | hours | — |
| Application Temperature (at +23°C and 50% R.H.) | 5 - 30 | °C | — |
