Colorite Performance
- Chemical Family
- Acrylics & Acrylates
Colorite Performance is protective acrylic paint with high resistance to UV rays for internal and external use, available in a wide range of colors.
Properties
- Physical Form
- Liquid
Product families
- Protective Coatings
Other characteristics
- Brand
- Mapei Spa Colorite
- Features
Durable, Good UV Resistance, Long Term Protection, Salt Water/Spray Resistant, Sunlight Resistant, Water Resistant
- Product Type
- Coating
- Application Method
- Brush, Roller, Spray
- Compatible Substrates & Surfaces
- Concrete, Painted Surfaces
- Markets
- Building & Construction
- Paints & Coatings
- Storage
24 months if stored in a dry place away from sources of heat and at a temperature of between +5°C and +30°C. Protect from frost.
- PACKAGING
Colorite Performance is supplied in 5 and 20 kg plastic drums.
- Consumption
Consumption is heavily influenced by the absorption and roughness of the substrate, by the color of the paint applied and according to the application technique used. Under normal conditions, consumption is generally 0.3-0.4 kg/m² (for two coats of the product).
- Technology
- Ready-to-Use Products
- Usage
For painting all old and new surfaces and surfaces, including those which are already painted, where both an attractive, smooth finish and a long-lasting, protective coat against environmental aggression and sun light are required.. The special formulation of the product makes it particularly suitable for painting all cementitious and lime or gypsum-based surfaces which require longlasting, durable protection, good water repellence and permeability to vapor.
- Packaging Type
- Drums
- Recommendations
Do not apply Colorite Performance on damp substrates, or on substrates which are not fully cured.; Do not apply Colorite Performance if the temperature is lower than +5°C or higher than +35°C (the surface must be dry and must not be in direct sunlight).; Do not apply Colorite Performance if the level of humidity is higher than 85%.; Do not apply Colorite Performance if it is about to rain or in windy weather.
- Application Methods
- Brush
- Roller
- Spray
Technical data
Table 1 of 1
31 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Density | approx. 1.35 | g/cm3 | EN ISO 2811-1 |
| Dry Solid Content | approx. 61 | % | EN ISO 3251 |
| VOC Content (ready-mixed product (white)) | max. 15 | g/l | European Directive 2004/42/EC |
| VOC Content (ready-mixed product (coloured)) | max. 26 | g/l | European Directive 2004/42/EC |
| Colour Variation (after 1000 hours exposure to a Weather-Ometer (White color)) | max. 1 | — | ASTM G 155 cycle 1 |
| Colour Variation (after 1000 hours exposure to a Weather-Ometer (RAL7032 grey colour)) | max. 1 | — | ASTM G 155 cycle 1 |
| Hiding Power at Spreading Rate of 6.9 m²/l (class 2) | min. 94 | % | EN ISO 6504-3 |
| Wet Scrub Resistance 40 Cycles (class 5) | max. 5 | micron | EN ISO 11998 |
| Specular Gloss 85° (dead matt) | 3.3 | — | EN ISO 2813 |
| Largest Grain Size | max. 100 | micron | EN 21524 |
| Oblique | GT1 | — | EN ISO 2409 |
| Permeabily to CO2 | 1363475.0 | µ | EN 1062-6 |
