TATREN IM 55 80

Chemical Family: PolyolefinsPolypropylenes (PP)

TATREN IM 55 80 is a reactor impact copolymer of good processing stability and high fluidity. This grade contains very effective and modern nucleating agent which in combination with antistatic agent provides short cycles, good dimensional stability of final articles and good mold release in the injection molding process. TATREN IM 55 80 is characterized by excellent organoleptic properties (low taste and odor), high stiffness/impact balance and good flow.

Product families

Applications

Consumer Goods — Housewares
Consumer Goods — Sports & Recreation

Automotive & Transportation — Automotive

Interior

Printing & Packaging — Packaging

Food & Beverage Packaging
Industrial & Transport Packaging
Non-Food Consumer Packaging

Product Families

Plastics — Basic Thermoplastics

Polyolefins

Other characteristics

Brand: TATREN
Polymer Name: Polypropylene Impact Copolymer (ICP)
Additives Included: Anti-Static Agent, Nucleating Agent
Anti-Static Agent
Nucleating Agent
Processing Methods: Compounding, Injection Molding
Markets: Automotive & Transportation
Consumer Goods
Printing & Packaging
Recycling: Polypropylene resins are suitable for recycling using modern recycling methods. In-house production waste should be kept clean to facilitate direct recycling.
Processing: TATREN IM 55 80 can be processed on standard injection molding machines. Recommended processing temperatures are 190 - 250°C.
Technology: Plastics
Packaging Type: Bags
Labeling Claims: Food Contact Acceptable
Recyclable
REACH Statement: Polymers are exempt of REACH registration. However, their raw materials which mean monomers and relevant additives have been registered. SLOVNAFT, as. is committed to fully respect legislation and will only use REACH compliant raw materials. At this point in time PP TATREN does not contain any substances specifically identified as SVHC at levels greater than 0.1%.
Material Features: Anti-Static
Dimensional Stability
Excellent Processing Stability
Good Balance of Properties
Good Flow
Good Fluidity
Good Impact Strength
Good Mold Release
Storage and Handling: Pellets are packed in 25 kg PE-LD bags and transported on stretch or shrink-wrapped pallets at eligible load of polymer 1375 kg. Heat treated pallets are available as well. We use adhesive between the bags in order to avoid their slipping. Pay attention to this fact during the removing of the bags from the pallets. The preferred method is to lift the bag at first without rotation. Transportation in a road silo or rail silo is also available.; Since polypropylene is a combustible substance, the fire safety rules applicable for combustible materials in warehouses and store rooms should be observed.; If polymer is stored in conditions of high humidity and fluctuating temperatures, then atmospheric moisture can condense inside the packing. If it happened, it is recommended the pellets to be dried before use. During the storage polypropylene should not be exposed to UV radiation and temperatures above 40°C. Producer does not take responsibility for any damages caused by adverse storage
Certifications and Compliance: REACH Exempt (Europe)
Plastics and Elastomers End Uses: Caps
Closures
Containers
Cosmetic Packaging
Food Packaging
Household Goods
Pails
Rigid Films
Plastics and Elastomers Functions: Resin
Plastics and Elastomers Processing Methods: Compounding
Injection Molding

Technical data

Table 1 of 1

14 rows

Characteristic	Value	Unit	Method
Flexural Modulus	1400	MPa	ISO 178
HDT (0.45 MPa, Flatwise)	92	°C	ISO 75-1,2
Izod Impact Strength (notched, -20 °C)	4	kJ/m²	ISO 180/A
Izod Impact Strength (notched, -20 °C)	7	kJ/m²	ISO 180/A
Izod Impact Strength (Notched, -20 °C)	4	kJ/m²	ISO 180/A
Izod Impact Strength (Notched, -20 °C)	7	kJ/m²	ISO 180/A
MFR (230°C/2.16 kg)	55	g/10 min	ISO 1133-1
MFR (230 °C, 2.16 kg)	55	g/10 min	ISO 1133-1
Modulus of Elasticity in Tension	1400	MPa	ISO 527-1,2
Rockwell Hardness	80	R scale	ISO 2039-2
HDT (0.45 MPa, flatwise)	92	°C	ISO 75-1,2
Tensile Strain at Yield	4	%	ISO 527-1,2