Nexa3D xMED412
Nexa3D xMED412 is a strong, durable, photopolymer material exhibiting mechanical characteristics like polypropylene. The product attributes include excellent elongation, impact strength, and compression strength for use in applications wherewear resistanceiscritical. Parts manufactured with xMED412 are bio compatible in addition to being machinable, tapped, orpolished.
Product families
Applications
- Medical Devices & Assemblies
Product Families
- Photoactive Resins
Other characteristics
- End Uses
- Medical Devices
- Tensile Strength
- 19.0 - 21.6 MPa
- Processing Methods
- 3D Printing
- Note
All specimen are printed unless otherwise noted. All specimen were conditioned in ambient lab conditions at 19-23C / 40-60% RH for at least 24 hours. ASTM Methods: D638 Type IV, 5mm/min, D790-B, 2mm/min, D256 Notched IZOD (Machine Notched), 6 mm x 12 mm, D648, D2240, Type "D" (0, 3 seconds), D570 0.125" x 2" Disk 24hr@ 25°C, D1475, D7867@ 25°C (77°F) 1. TaskID Reference: FOR17060 2.TaskID Reference: FOR17061 3.TaskID Reference: FOR17059 4. TaskID Reference: FOR20031 5. TaskID Reference: FOR17058 6.TaskID Reference: FOR17057 7.TaskID Reference: FOR17470 8. TaskID Reference: FOR17471 9. TaskID Reference: FOR17473 10.TaskID Reference: FOR17479 11.TaskID Reference: FOR17478 12.TaskID Reference: FOR17689
- Color
- Transparent
- Markets
- Healthcare & Pharma
- Limitations
Post Cure : xMED412 requires a UV/ Visible light post cure.
- Post Curing
xMED412 requires post curing to achieve specified properties. A wide array of post cure equipment can be used to cure appropriately.
- Technology
- Plastics
- Labeling Claims
- Biocompatible
- Post Processing
xMED412 requires post processing to achieve specified properties. Prior to post curing, support structures should be removed from the printed part, and the part should be washed in a compatible cleaner. Nexa3d recommends either IPA or Cleaner C™ in 2 minute interval wash cycles. Use compressed air to remove residual solvent from the surface of the material between intervals.
- Use Direction
Nest the parts you would like to print in a CAM software. For swab parts, nest them in a vertical orientation and packed to maximize the build area without compromising print quality.; Prior to use, agitate the bottle of resin and allow the resin to adjust to an ambient temperature between 20-25°C / 68-77°F.; Only print Nexa3D xMED412 on NXE400 with settings validated by Nexa3D. Alternative printers must be validated by Nexa3d to determine print settings needed to generate a safe and effective device.
- Material Features
- Autoclave Sterilizable
- Biocompatible
- Durable
- Energy-Curing
- Ethylene Oxide Sterilizable
- Good Compressive Strength
- Good Impact Strength
- Good Mechanical Properties
Technical data
Table 1 of 2
20 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Tensile Strength at Break (Green)¹² | 19 - 21.6 | MPa | ASTM D638 |
| Tensile Stress at Yield (Green)¹² | 16 - 21 | MPa | ASTM D638 |
| Young’s Modulus (Green)¹² | 691 - 903 | MPa | ASTM D638 |
| Elongation at Failure (Green)¹² | 142.5 - 155.5 | % | ASTM D638 |
| Solid Density (Green)¹⁶ | 1.129 | g/cm³ | ASTM D1475 |
| Tensile Strength at Break (Post Processed)¹ | 36.6 - 39.4 | MPa | ASTM D638 |
| Tensile Stress at Yield (Post Processed)¹ | 28.06 - 30.66 | MPa | ASTM D638 |
| Young’s Modulus (Post Processed)¹ | 1202 - 1288 | MPa | ASTM D638 |
| Elongation at Failure (Post Processed)¹ | 137 - 145 | % | ASTM D638 |
| Flexural Stress at Yield (Post Processed)² | 35.04 - 40.16 | MPa | ASTM D790 |
| Flexural Modulus (Post Processed)² | 946 - 1098 | MPa | ASTM D790 |
| Flexural Strain at Break (Post Processed)² | min. 10 | % | ASTM D790 |
Table 2 of 2
2 rows| Characteristic | Value | Unit | Method |
|---|---|---|---|
| Viscosity (25°C)⁶ | 487 - 787 | cP | — |
| Liquid Density¹⁶ | 1.0614 | — | ASTM D1475 |
